-
Content Count
4969 -
Joined
-
Last visited
-
Days Won
14 -
Feedback
0%
Posts posted by EBondo
-
-
13 hours ago, flip12 said:Strangest gloves by each recent company…
Bauer: one90, appreciate the attempt to push the envelope but it tried too hard to look different as well.
CCM/Reebok: 30K, maybe the ugliest glove of all-time.
Easton: Mako, ideas were decent, just horrendous appearanch.
Mission: Fuel 90.
Warrior: pretty much anything since the QRL.
True: Anything Z-Palm
Pure Hockey had an SMU that was the 30K glove, without all the plastic that made the glove as ugly as it was and a pro palm. Still to this day my favorite gloves I've owned.
-
Unfortunately Bauer won't be implementing all three fits to the roller line, at least as of now.
3XProRH will come in Fit 2 only. I really wish Bauer would give a Fit 3 option. I know the roller community is nowhere near as large as the ice community, but it really would set them apart knowing if a guy came in with higher insteps/volumed feet, we would have something that could comfortably work off the shelf.
- 1
-
Heard a story from my area manager about Evgeny Kuznetsov going into the Rockville Pure Hockey and buying a pair of 3XPro skates because he "doesn't like the stiffness of the Hyperlites." Didn't believe they would actually see game action, and then I see this from today. 3XPro, Carbonlite steel.
This guy really is one of us. Apparently he also buys 40-50 rolls of Renfrew tape at a time because he likes "the green core tape" lmao
- 4
-
Looking at the shelves in my work, I'd be inclined to agree. We're sparingly getting skates. We just received our most ice skates in months this past week, and we maybe got 15 pairs of 3S skates.
Custom lead times are now minimum 130 days (Bauer) due to staffing shortages. It's going to be tough for the beginning of the year I think.
-
Dealt with our first one last week. Unfortunately, this one broke in the front of the blade. It broke off to the point we could not remove the piece from the holder, and ended up not only needing to replace the steel, but having to replace the entire holder as well.
Very disappointing if this is going to be a theme - whether common or not.
-
20 hours ago, Beflar said:Do you guys think that the demand for the 100 flex stick have gone down over the last five ten years?
It's almost nonexistent at this point. There's a few outliers, for sure, but for the most part, we don't see it. We don't even bring in 102/105 flex on booking orders - only on closeout.
At this point, I don't think the average beer league player has either the technique, or strength to get what is needed to properly use a 100 flex.
- 2
-
On 7/21/2021 at 3:02 AM, MyBoxersSayJoe said:In the '90s it was like the higher the flex, the more manly you were. Aluminum sticks, 100 flex, etc. Completely ignored flex in some search of ego or something.
I think stick technology has evolved so much that you can now let the sticks do the work for you. Takes some adjustment depending on the sticks and your body type, mechanics. Over the years I've gone from nose height on skates to chin height. And I've dropped from 77 flex to flipping between 65 and 55 Gaudreau pro stocks. I'm 5'7", 145 lbs.
The problem is a lot of guys who played then, still have that same mindset.
I love TRUE's sticks, because they make their 65/68 flex at senior shaft dimensions. I'd use a 65 flex all day if every brand followed suit. Alas, they don't, and I feel like the INT TRUE's noodle out much quicker than desired, so I've since gone to 70 flex CCM's. But the main issue I have is height, being only 5'6 (but 200 lbs - damn COVID). I just don't cut as much off the stick anymore.
-
On 4/18/2021 at 2:41 PM, Beflar said:So any official news on the price of these CCM Super Tack X helmet yet?
I have seen what it'll retail for. It's not quite as high as listed by some in here, but it's up there. Won't say exactly in case it's not allowed to be said yet.
- 1
-
On 3/25/2021 at 5:19 PM, Westside said:I suppose 'concerned' may not have been the right word choice. They're hockey skates so they're going to get beat up. I was just surprised by this the first game out. I understand the idea of drilling a hole to try and stop a potential spread of the crack, but I'd be weary to do that in case this becomes a problem and I have to file a warranty claim with True. Perhaps I'll contact them first so it's documented and then drill a hole.
The original photo might not show this, and I'm not sure how the toe cap/boot is on pre-TF9 True skates, but there is a slight gap between the boot and the toe cap. Both boots and both sides of the toe cap is like this. It's hard plastic, but you can push it and make it flex a bit if you try. Here's a close up showing the area I'm referring to where the diagonal pattern meets the toe cap. Where the toe cap is glued/flush with the bottom of the boot is more or less where the crack started.
I'd be careful of your wording if you reached out to TRUE regarding this. At the end of the day, they could tell you you're out of luck because you modified the original skates - therefore voiding any warranty they offer.
- 2
-
Holder size goes up on every half size Fit 3 I’ve seen.
- 1
- 1
-
4 hours ago, JR Boucicaut said:@EBondo should be at PH Sterling.
3 hours ago, JimmyTheDriver said:Nice. As long as they have a CCM scanner for customs that’s were I was planning to go. @EBondo - you do, right? I saw a Bauer scanner when I was In there last getting the 80ks that are breaking down on me.
Hey Jimmy,
We do have the CCM scanner available. Shoot me a PM if you want, let me know the gist what you're looking for. Our only problem is stock when it comes to CCM, as Ribcores are not a skate we get as frequently, and the Tacks obviously being refreshed this year, our stock is a bit on the depleted side. However, since you'd be coming from further away, I can work with some stores to see if we need to get anything in ahead of time.
Also, not sure when exactly you were looking to head on over, but just as an aside, I'll only be in this location for another month, as I'll be transferring to another location. But I can always get you set up with one of the other guys.
-
2 hours ago, Oilers97 said:https://imgur.com/gallery/7uim6m5
im shocked that pro players wouldn’t be using the top of the line elbow pads. Aho looks to have S190 elbows. Is this common?
Best believe if I was in the show, I'd try to find a way to still be using my now 20-year old Jofa's, which are anything but top of the line.
I can't stand modern elbow pads. They're so bulky and restrictive. If I HAD to pick a modern elbow pad? Give me the FT370's.
-
1 minute ago, oldtrainerguy28 said:Can't wait to see the see the results.
That happens when a company wont send a helmet to be tested VT then had to purchase all the helmets
I thought it was weird when I saw Virginia Tech as the company and was shipping a royal blue helmet, then I was like "oh....right....that thing." Haha
- 2
-
1 hour ago, oldtrainerguy28 said:Ya cause the VT test means anything when it comes to safety. Completely useless and such a croc.
You want to know what's funny? I shipped a TRUE helmet to Virginia Tech this week from my Pure Hockey store.
- 3
-
I've always loved the way mid-kick sticks kick in terms of flex, but I seem to lean the way of low-kicks because I prefer the blades more on low-kick sticks. Ideally if I could have a Nexus shaft/kickpoint and a Vapor blade, I'd be all for it. But I'm not about to buy customs.
- 1
-
You can't find discount codes for retail sticks, let alone customs.
- 1
-
I’m not at liberty to say.
-
Looks to be the new ADV in the wild.
-
Fit profile shouldn't be much different, however, if you have a chance to jump on a 180 (180 or S180), I would hop on that very quickly before buying the S29. Major difference in boot quality.
- 1
-
August 2nd is the the release.
-
Nexus Team glove, we use them through the Pure Hockey QuickTeam program, very sharp looking glove....and yep, that's definitely one of Danny's twigs. 77 flex most likely, P91 and Flyers color scheme.
- 1
-
Correct. And if you want to go with the Alphas, I definitely recommend going down a size.
-
On 11/15/2018 at 7:19 PM, nyquil said:These would go great with my JDP 2000 elbows I've been using since I was 9 (1999). Great find!
-
On 1/9/2019 at 2:22 AM, Cavs019 said:He’s head to toe in discontinued gear 😄
V08 helmet
HG55 (CL500) gloves
Supertacks 1.0 stick
2015 Jetspeed skates
I always found it funny, the guys CCM uses to market their sticks after (Crosby, McDavid, Burns), all use other sticks.
2023-24 gear sightings
in Ice Hockey Equipment
Posted · Edited by EBondo · Report reply
Found this interesting, albeit not surprising. You can clearly see the outsole on Connor McDavid’s “FT6P’s”