tcraig

Ha, no problem. Yeah, really looking forward to getting eyes on one in person to do a definitive comparison - my local Pure Hockey didn't get any of the P90TM in their release day stock.

I have a CCM prostock stick that was a sample, the nameplate simply reads "P90T". I also have a Jamie Benn pro stock stick that is the Benn Pro curve, which is identical to the P90T I have. That's what I'm referring to as P90T, when I ask of this is simply max height version of that curve. My P90T and Benn Pro sticks are a p92 plus the toe kink. As someone who likes the profile and mid curve of the p92, but also likes the extra toe of a p28 for shots off the toe, it's terrific.

That's extremely disappointing to hear. And confusing from a naming perspective. Sigh.

Thanks I'll take a look tonight. Was just curious since I've been using P90T (Benn Pro) for awhile now and it's far and away my favorite curve, so it coming to retail would be awesome.

Now that the official preorder emails are out and specs are being posted at retailers, is there any official information on if the P90TM pattern CCM is offering on the FT3 Pro is just a max height version of the pro stock P90T? Also, anyone know if CCM plans to begin offering that pattern on the other stick lines as well?

Does yours still have the barcode sticker at the top of the shaft (where you'd tape the butt end up)? That's really the only way to decode CCM sticks - LK shafts usually designate the low kick team build, but I'm not sure if they had started offering multiple team build offerings in terms of kick point when yours was made. That barcode sticker would help, as the code on there identifies the build.

@jeffg that very well may be, I'm not sure. I saw some marketing materials for the DX stick, and without saying too much it looked like the blade was a differentiating point between it and the QX as opposed to a new shaft geometry. So T8 DX may be the real deal - but again I don't know for sure. @.am I never used the DT2, but from what I remember that was a Dagger Taper stick (so low kick). Therefore the Covert line would be the closest -- they had refinements of the Dagger Taper technology up until this year's model, the QREdge, which has a new taper geometry called the Edge Taper. Still an ultra low kick stick. But the previous generation Covert stick (the QRL) may be more of a modern update to the DT2. The Alpha line is more of a low-mid kickpoint. The Saber, Quick Strike, etc. terms are essentially marketing jargon to refer to features -- i.e. Sabre is in reference to the Sabre Taper shaft geometry in the lower portion of the shaft, which is a shape that is supposed to result in less twisting of the lower shaft for more accurate shots. QuickStrike is just marketing trying to reinforce that there is still a quick release....don't focus too much on those types of terms, just if the stick is Covert (very low kick) or Alpha (mid-low kick).

The code indicates it's a 90 flex QX build - so I'd say you're guess of QX dressed as DX is correct. I haven't seen what the DX code is yet - T8 is Alpha QX, and T9 is the QREdge build.

Profile 3: Quad 1 Steel: Step Blacksteel - 280 Hollow: 3/4" ROH About Me: I started playing back when I was about 5 years old, and played competitively up until college (high school, Junior C and B). Took around a 10 year break, and got back into playing about 2 years ago. Currently play in the A/B league my rink offers, and am usually on the ice 2-3 times a week. Review: Whoooah baby. Coming from the Zuperior M, I was curious to see how much of a difference the various profiles would actually make in my skating. For example, in that profile I noticed a bit more speed and stability over the standard 10' I'm used to, but nothing crazy that merited maintaining it. This Quad 1, on the other hand, is a HUGE difference for me. Agility? Check. Stability? Check. Speed? As much as you're getting out of me. Acceleration? You bet. I noticed basically all of the benefits to stability and top end speed that I got from the Zuperior M, but without the mobility penalty. In fact, I feel better mobility with this profile than I did on the 10', and I even feel more mobile than I did back on a standard 9' radius. It's honestly insane to me how much of a difference I feel between the standard single radius profiles I was using and this. Overall, I think that I have slightly less top-end speed than I did with the Zuperior M, but still more than I had on 10'. Stability seems essentially the same, if there is a difference it's imperceptible to me. Acceleration and mobility is where the Quad 1 shines for me - while I may have a slight reduction in top end raw speed, I get up to that speed so much faster than before it doesn't matter. I feel like the quick acceleration here is a massive benefit, allowing me to close in on a defender and then turn it up another notch and quickly get by, which isn't something I've really been great at in the past. The closest thing I've felt to this acceleration-wise is when I was skating in Makos on a 9' radius, with that aggressive Mako forward pitch. The downside back then was stability, especially on transitions from forward to backward skating (I would feel too pitched over my toes on the transition). The Quad 1 basically feels like that did in terms of forward skating, putting me a bit over my toes in a position lending itself to quick acceleration, but when I transition to going backwards it feels more stable than the standard 10' neutral pitch steel I've been on lately. It's pretty incredible, and I would highly recommend people try a quad in their steel size range. I haven't felt this good on my skates since...ever. Acceleration: 4 Mobility: 4 Stability: 3.5 Speed: 3.9? It's so close to the Zuperior M, but I get up to speed so much quicker it's basically a wash. Other profiles reviewed: 10' (standard LS4 profile) Zuperior M

Profile 2: Zuperior M Steel: Bauer LS4 - 280 Hollow: 3/4" ROH About Me: I started playing back when I was about 5 years old, and played competitively up until college (high school, Junior C and B). Took around a 10 year break, and got back into playing about 2 years ago. Currently play in the A/B league my rink offers, and am usually on the ice 2-3 times a week. Review: For me, this is a bit of an improvement over the stock LS4 10' radius that I have been using, but not dramatically so. I can feel a bit of extra speed and more stability, but definitely at the expense of agility. I'd be curious to see how this profile fares with a more shallow hollow; I've never gone below 3/4" but I felt like I had too much grip when trying to do quick cuts compared to the 10' LS4. I could likely get used to it over an extended period, and I did feel that it almost forced me to have a longer stride, so for my beer league I'd take the hit in quick mobility in exchange for the extra top speed. I didn't really notice any difference in acceleration, just that I had more top end speed and I maintained more of that speed coming out of turns. I'd stick with this for now over the standard 10' profile I was on, but I don't think I would go out of my way to maintain the profile over time. That might change if I enjoyed a more shallow ROH with it, since it just feels a bit too grippy to me as is. Acceleration: 2 Mobility: 1.5 Stability: 3.5 Speed: 4 Other profiles reviewed: 10' (standard LS4 profile) Quad 1

Profile 1: 10' (Control) Steel: Bauer LS4 - 280 Hollow: 3/4" ROH About Me: I started playing back when I was about 5 years old, and played competitively up until college (high school, Junior C and B). Took around a 10 year break, and got back into playing about 2 years ago. Currently play in the A/B league my rink offers, and am usually on the ice 2-3 times a week. Review: This is...fine. I'm not in love with it, but it works. I used to use 9', but decided to stick with the stock 10' on my set of LS4 steel and like the bit of extra stability and speed, however I do notice a reduction in agility from 9'. Since beer league isn't super stop and go, I decided to stick with 10' for now. This will be my control profile for this process. Acceleration: 2 Mobility: 2 Stability: 3 Speed: 3 Other profiles reviewed: Zuperior M Quad 1

My original SuperTacks are the same way.

Any word on the ultrastop material coming to retail, such as through the MSH Pro Shop? I'd still love to get them on my Makos!

Definitely interested, last summer was great!

Don't know yet, UPS bobbled the shipping so it arrived later than anticipated and right before I left for vacation. A couple things I noticed are the grip texture is different than the QRL and the shaft corners are more rounded. Seems a bit better balanced.