Jump to content
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble
Slate Blackcurrant Watermelon Strawberry Orange Banana Apple Emerald Chocolate Marble

Leaderboard


Popular Content

Showing content with the highest reputation on 02/10/21 in all areas

  1. 3 points
    Howdy, When I was a kid, I was sure that the thumb loop was there to stick the end of the stick through. 🙂 Mark
  2. 2 points
    crosby using the PP77 Coffey in practice
  3. 1 point
    My local store has it, but it was super "common sense" if you think about hockey at all. You grab a specific pre-labelled stick with the markings on it, take a few shots with it and the app figures out the 3 sticks it thinks you should be in. From what I was told, it simply recommends the same sticks people would if you give them information about your playing style. For example, using me as the example since I did it: 6'3, 220lbs Defense not a lot of slapshots, aimed a quick release. The stick recommended 85 Ribcor as 1st, then 85 Jetspeed as 2nd, then 75 Ribcor as 3rd. Which is what anyone listening to how I play would recommend. The only thing super helpful with it is if someone is using a stick that is way too stiff, the lack of flex in the stick would help show that off.
  4. 1 point
    Thanks for the detailed explanation Pucks! didn't realize True was reinventing the wheel so much with their holder?! comparing @ the store side by side it looked lower, but it might be misleading if the foot sits lower in it. what I found surprising was that Chara skips the top eyelet in his Trues, but I don't recall him ever doing it in Bauers he was all these years before switching to True?! does anyone else around here skip top eyelet in Trues? I've always been doing it in Supremes but was under the impression Trues flex differently so skipping isn't required?
  5. 1 point
    There's definitely no "one size fits all" to this, and I'm certainly not trying to convince anyone to do it. Just to be clear.
  6. 1 point
    I completely agree with you. It's a pity that many people simply ignore it!
  7. 1 point
    If you request the skates to be drilled for Edge or XS holders they will do such and ship the SHIFT holders unmounted. I think all holders have pros/cons and recommend players use whatever works best for them.
  8. 1 point
    As someone mentioned earlier there is a lot of discussion about this on the True TF9/TF7 thread but I understand it’s tedious to sift through so here is a mashup of some of the posts I made about the Shift... When I got my True Customs I really wanted to give the whole setup a chance including the Shift. I could NOT get used to them. I struggled badly with the Shifts, especially backwards skating and transitions. I went so far as to profile the steel twice but it was just too much of an adjustment for me and I ended up swapping for Tuuk Edge. Felt 100% back to normal in 10 minutes. If you read around on the True Custom / VH thread a lot of guys talk about how the Shift holders are actually quite different from the others. I don’t know much about the CXN but I know that the XS is designed very much like the Tuuks for the specific reason of how popular Tuuks are with pros. I’m guessing the CXN isn’t far from Tuuk either since they dominated that era. I can’t remember all the details but three of the key points about the Shifts are: 1) They have a very aggressive forward pitch. More so than any of the other holders. Combine this with the boot that also is designed for more forward pitch and personally I felt like I was falling forward all the time and though I somewhat adjusted it never felt right to me. 2) The Shift holder is designed to put more steel under and behind the heel. Supposedly this is better for skating but again personally this was the most uncomfortable aspect for me. I felt like my toes were “hanging” way out over the front of the steel. Just not a good feeling for me and I “toe picked” a LOT amy first few times out. 3) The Shift is a Symmetrical holder. Meaning there is no difference between the left and right holders. They have the exact same rivet pattern and “down angle” to the steel. There is a lot of science behind this part and I’m not sure if this really made a huge difference but some people on here says this changes the distribution of weight and downward force into the steel this affecting stride and balance point. Again, there are some much more knowledgeable people than I on here and I’m just relaying my personal experience. I can’t personally comment too much on #3 because 1 + 2 were so prominent for me. Lastly I want to add that I know a few excellent skaters that kept the Shift holders and like them. Upon asking they all said that it was a bit of an adjustment but that after a few weeks they didn’t have any issues. I think it may come down to trial and error unfortunately. Good luck and I want to close by saying that my True’s are the best fitting and performing skate I’ve owned and I’ve owned many. Absolutely love the boot and will never buy a skate that isn’t built off a mold of my foot ever again. I think True was doing a 30 trial for the TF9 + TF7. If still going you could get a pair of TF9 to try out the shift holder but from what I hear it is extremely unlikely for True to do anything but ship with the Shifts so if you know you want the boot just get the Customs and give the Shifts a try. My LHS ended up putting on Tuuk with LS5 in a straight swap for the Shifts with Blacksteel and 2 extra regular Shift steels sets I had. Hope this provides some insight...
  9. 1 point
    Link(s)? And isn't the Bauer flagship skate always more expensive than the new Mission flagship skate? The 2x Pro is listed at $1,199 .00 on Bauer's website. I can't see a Mission skate surpassing that.
  10. 1 point
    I had the tip of my pinky sliced off from a skate. It's crazy how white your bone is! They reattached it...demerol is awesome! It's not pretty but I can still pick my nose...that's what counts.



×
×
  • Create New...