-
Content Count
334 -
Joined
-
Last visited
-
Days Won
7 -
Feedback
0%
Posts posted by YesLanges
-
-
Sean Walker recommends aiming for a target no larger than one square of the net mesh. Visualize a laser beam coming from the toe of your blade and consciously aim that laser beam right at the center of the 5-hole, or in your case, maybe at the bottom edge of the middle of that hole. Take a video of your follow-through and see if it's really staying as low to the ground as you think it is. If it isn't, maybe try tying a string across your shooting lane a foot off the ground and follow through with your blade under the string. Lower the string as much as possible. You could also check the video to see where your stick actually is when the puck comes off the blade and see if you can release it a little bit later in your shooting motion.
-
I don't think there's any issue with those pads in terms of their primary function of protecting your elbows from direct ice impact. Don't pretty much all modern elbows (and most decent elbows for the last 40 years, for that matter) all do that well? It's the secondary coverage of the rest of your arm that varies from model to model and anything similar to Jofa 9135 should provide plenty of protection everywhere they cover.
-
I don't use it unless I'm protecting recent dental work (or have some other specific reason not to risk playing with my less protective vintage Cooper Pro-Tec cages), but I have the clear pro version of their original full visor. It works as advertised without any fogging at all, except for on the bench in certain conditions. Anybody have any idea why they seem to have discontinued the original product? It's pictured in their "About" page, but doesn't seem to be available for sale any longer. I prefer my vintage cage, but I wore the Boulder AVA for a month after a wisdom tooth extraction and during a double-header the night before I was scheduled to leave for a vacation that couldn't be postponed for stitches or dental repairs. (The Pro-Tec is full-face, but there are gaps large enough to catch a stick, although it's not that likely.)
-
On 6/22/2020 at 9:10 PM, dkmiller3356 said:I also have my 86 year old mother in law living in my house.
If that were mine, it would be a reason to go back to playing ASAP😁
- 1
-
Could we please trouble you guys for responses to the questions asked since your last response?
Thanks in advance...much appreciated.
-
18 hours ago, penguinpelts said:If I can piggyback on this thread... I haven't owned rollerblades in many years but want to get a pair to get back into skating while rinks are up in the air.
Are roller hockey skates usually the same size as ice skates? What's a good brand that offers a decent, cheap option, if any exist. I don't want Wal-Mart blades, but I'm also not going to go play in these any time soon, if that makes sense. Thanks folks!
Same sizing as ice skates. Just get yourself a relatively cheap pair of "entry-level" skates from any of the manufacturers whose boots you're used to, already. A modern pair of $150 or $200 Bauers (for example) are much better than the top of the line skates that you could have bought 20 years ago. Same goes for modern ice skates if you decide to go with a conversion.
I hadn't skated on wheels in 20+ years until I dug out my 1997 Bauer "Breakout 50" and used them until my Marsblades were installed on a new pair of boots. In the meantime, I tried and then resold a pair of Bauer RS; the boots were fantastic but I didn't like the Hi-Lo setup instead of smaller wheels in front and in back. The boots I bought for the conversion were virtually identical to them: entry-level Bauer MS-1 ice skates ($65) and they're great. You're not going to break down either of those boots without skating very hard in them for quite a while. If you spend $300 or $400+ on much higher-end skates, you may find them way too stiff, as I did: I also bought a pair of Alkali Revel II and returned them to Hockey Monkey immediately without even skating in them (obviously) just based on how uncomfortable and stiff they were compared with the Bauers, which felt perfect right out of the box and without baking. (The MS-1 are so "low level" that they're not even intended to be baked.) For reference, I normally use very stiff ice skates and tape them heavily for lateral support...so, if I'm saying these boots are plenty stiff, you can trust that.
- 1
-
On 6/13/2020 at 2:38 PM, Kyosuke said:Does anyone know whether the large O1 chassis can accommodate 80mm wheels? I'm thinking of doing a 76/80/80/76 setup
It looks like it would be a very tight fit. There's barely 4-5 mm of space in between the middle two 76 mm wheels. Maybe less than that.
On 6/14/2020 at 11:06 PM, Miller55 said:I'd like a more in depth explanation of the flow motion tech in the r1 compared to o1. In layman's terms obviously. I get the basic idea, but I'd like to understand what you mean by "optimized for game play." Sounds nice, but what exactly is different and what exactly is used to determine optimized?
Also, I'm assuming these take floating spacers?
I think they're talking about the fact that the 01 can only be adjusted for how much movement you want the center bolt to allow, while the R1 can also be adjusted for where you want the axis of movement to be and/or set independent degrees of movement for the front and back. They come with fixed spacers but standard bearings, so I'm sure you could use floaters.
My question for @Marsblade is why the fixed axis 01 feels more like ice and why adjusting the R1 movement to suit your skating style makes the R1 feel less like ice, because adjusting the movement seems like the same thing as profiling steel runners to suit your skating style on ice. Why wouldn't the R1 just feel like skating on ice on a custom-profiled blade?
So far, they feel really good...extremely smooth and already much better and less cumbersome than traditional chases even with the bolt fully tightened. (I'm using some ABEC 11 bearings instead of the ABEC 9 they come with, but that probably doesn't make much of a difference.) It's definitely much more like skating on ice and wheels no longer feel like I'm on skis and my skates no longer fight against some of what my feet are trying to do. But I wouldn't say that they "force" me to do anything different (which is the way MB refers to it); it's much more like they just allow me to skate much more like I normally skate. My quads do get more involved, but I don't notice it until I'm done and they feel sort of like I just did a light leg workout.
Maybe when I open it more, I'll understand what MB means when they say the 01 force you into better skating mechanics. I've only opened the bolt about 1 full turn so far, maybe a little less...I only open it about 60 degrees after each time I skate. Whenever I first get back on them after opening the bolt a little more, it feels like my weight is too far back on my heels for a few seconds until I get used to it. The reviews I've watched suggest the exact opposite: that they put you more on your toes and that new users feel like they're going to face-plant.
Another question for @Marsblade is you've said (here and in promos) that the smaller front wheel provides more of a challenge. Could you explain what you mean by that and what's different about skating on the advanced set-up? I'm not planning on trying it until I'm comfortable with the loosest bolt setting, but I'm curious how you'd characterize the difference made by the smaller front wheel.
-
I don't know offhand, but I've seen the video breaking down the fit of their three lines...shouldn't be hard to find at all. Same fit as those RS as far as I can tell from wearing them both. In any case, once you narrow it down to the right line, I'd go with a cheap pair of ice boots in the right line...probably the cheaper option to in-lines right now, especially, if you're just getting them to convert to MB, anyway. Both felt great to me right out of the box...the RS can be baked, not these MS-1s, but they don't even need it. By comparison, I also tried on (and returned) a much higher-end pair of Alkali Revel IIs and they felt ridiculously stiff to me...like they'd have taken forever to break in even with baking...them shits went right back to Hockey Monkey.
-
6 hours ago, MyBoxersSayJoe said:Hmm. I'm now seeing that Marsblade O1 chassis are in stock. Can I order just boots from somewhere? Or will everything I order have chassis and wheels on them? I did check sidelineswap for skates in my size, nothing much near it. Maybe just these cheap Tours in 7R: https://www.hockeymonkey.com/roller-hockey/skates/senior/tour-roller-hockey-skates-volt-kv4-sr.html Or Bauers in &R:https://www.purehockey.com/product/bauer-rs-inline-hockey-skates-senior/itm/36675-41/ Then get a Marsblade 01 chassis wheels and bearings. Then have them mounted and life's good? Okay skates for $400 + shipping & mounting?
I think you can get away with much cheaper boots: just get a pair of new low-end ice boots and have them converted. For background, I normally prefer a LOT of lateral support and I tape up my skates heavily, halfway up my Achilles tendon guard and over the first inch of my shin guards. I grabbed these entry-level Bauer MS-1s for $65 on eBay and got them back with Marsblades installed last week: https://www.ebay.com/itm/193394982832 There are plenty of similar skates available for under $100.
I'm going to wait until I work up to skating with the rocker bolt much looser before I review them in greater detail, but they're already great and a tremendous improvement over regular in-lines, and there's no issue whatsoever with these MS-1 boots. You might want a thicker tongue if you actually play roller hockey, but for off-ice MB training, these boots are awesome. In fact, I really can't believe how stiff and supportive modern "low-end" boots are. Same goes for the Bauer RS that I skated in twice while waiting for my MB to arrive: I just listed them on eBay because I don't like the Hi-Lo frames at all, but the boots are great...almost identical to the MS-1 ice boots. I'd need rockered wheel sizes if I were going with traditional in-lines, but I'm only going to be skating in MB now that I have them all set up.
-
28 minutes ago, Marsblade said:Yes, well aware that this is not ideal. We'll look at a dial marking for the 2.0. //Per Mars, inventor
In the meantime, can you suggest how far to open the bolt to approximate the amount of change that you'd recommend to increase movement each time on them to transition gradually between fully closed and fully open?
-
11 hours ago, shoot_the_goalie said:To answer your query, I find toe-dragging/dekes/dangles are MUCH easier on roller, but not because of the puck or whatnot. It's because I'm wearing minimal to no padding, so your joints, wrists, etc are all unencumbered and more free-flowing, allowing you to be more precise with movement. In general I can pull off moves in roller much easier than I can on ice, just due to the equipment factor. Try doing the between the legs dangle on ice after doing it on roller; the first couple of times, you'll mess up cause you can't bend your arms as fluidly, plus your "wider" legs get more in the way, now that you're wearing shins and pants...
I'm not doubting any of what you say about why roller is noticeably easier for you, but I don't think it's the gear in my case. I'm using some gloves, helmets, and elbows that are in my ice rotation and I've just never felt as balanced or as athletic in skates only...roller is the only time I don't wear shins and pants...I'm much more comfortable and usually do everything better in shins and pants...and I don't wear shoulders to practice and usually use my lightest gear. I'm thinking there might be other variables related to being on wheels vs. ice...like maybe 1 upside to 10 downsides of wheels vs. ice is more leverage pulling in from on top of gripping rubber wheels across a much larger surface contact area and maybe that makes the motion quicker and more efficient...something like that. Obviously, what you're describing is the case for most guys, because it's much more common to prefer to skate without pads anytime that's allowed at sticks & pucks. The one TD I can actually do fairly well on ice is pulling it straight through my legs from behind and my pads don't interfere with that at all. Pulling it between my legs and off my far skate is harder for me, but been working more on that lately, too.
11 hours ago, shoot_the_goalie said:I only started to really try them as an adult, cause back when I played competitively, ... (We also played north/south, dump & chase, poke checked, hip-checked, never drop passed, etc...you get the idea; older style hockey compared to the puck-possession style today...but I digress.)
I never even even saw a TD until one of my freshmen college roommates did it messing around in a room with a hard floor...and he was still just learning it when he became the 5th or 6th D-man at a Div II school ...he was about where I was with it before all the rinks closed, messing it up much more often than pulling a nice tight one. I never saw them at pickup in the late 70s, either, and that group included 2 future NHLrs (brothers), one of whom is now a HoF'r...and another NY Metro teammate of theirs back then who (barely) showed up on my first 50+ team in 2014. Never saw a TD among them (but I never saw the HOF'r play personally). Nowadays, it's a stickhandling fundamental that kids all can do really young. Back then, it was more of an elite skill among the highest-level players. Today, most bantams and lot of peewees have already mastered it. As you say, it's definitely a confidence booster and my body is getting very used to doing all the right patterns and postures....I'm even practicing it just with the top hand, which really reinforces the right mechanics. With a GB on a tiled (kitchen) floor, it's definitely as fast as a puck on ice...and the GB is lighter, so I'd be sort of surprised to be fumbling it again on ice for that reason....but the extra speed only seems to help stick it to my blade...so I dunno what to think...just gonna suck if it doesn't translate to ice.
-
Working out as much as always, because I haven't been dependent on a commercial gym for more than a decade...never been happier about that than this last 3 months, obviously. Skating for about an hour 3 x/week on a pretty good deck behind my building (roughly 80 x 40')...the only thing I can't do at all is shoot the puck out there. There's a railing on 3 sides and a gap on the bottom right over the parking lot...so I grabbed a whole case of those hollow 5' foam pool noodles on eBay for $50 and strung about 30 of them together (in 3 sections with carabiners on each end) and set them up around the 3 exposed sides of the perimeter (the 4th side is the building itself). I carry them out there tied up in a big bundle about the size of a boxing heavy bag and it only takes me about 5 minutes to deploy them and about twice that long to fold and bundle them all back up when I'm done. I was prepared for it to be a total waste of time and effort, but they work perfectly...maybe one of the best ideas I've ever had (besides putting together my own gym in 2008, after I realized we wouldn't even need a second car anymore if I did that). I've gotten very comfortable on my 1997 Bauers ("Breakout 50s") with 72-76-76-72 and with 78A wheels, my "edges" feel pretty close to ice but my Marsblades came back today installed on a pair of entry-level Bauer MS-1s that seem infinitely better than the boots I've been using.
21 hours ago, shoot_the_goalie said:Been really trying to work on more fluid toe-drags, forehand and backhand.
Hey, are toe drags much easier with a green biscuit than with a puck on ice or something? Because they suddenly just clicked for me since I've been out there on wheels. The GB puck speed on the surface I'm using doesn't seem much different than pucks on ice, but something suddenly changed very dramatically for me and I'm dragging that shit all over the place with relative ease, and pretty fluidly without them coming off my stick very much at all...in front of me, to the side, and from pretty far back behind to my back skate. The improvement really seems way out of proportion to the amount of extra time spent on it and I was expecting only gradual improvement and nothing like this improvement curve at all. Just hoping it carries over to the ice. When you guys perfected your toe drags, did they suddenly click for you like that, too?
-
Thanks again, Man...really appreciate your help in this thread...
-
The product pamphlet refers to the frame spacers, but only in connection with which arm of the skate key to use for them. There's no info about how the frame spacers actually work or how they're supposed to be adjusted (if at all) in conjunction with the center adjustment bolt. Any advice would be appreciated.
-
Thanks, Man...much appreciated.
- 1
-
On 5/28/2020 at 4:19 PM, Isles12 said:if you want an ice like feel go marsblade or sprung.
Anybody have experience with both who can offer a comparison?
-
In that case, I'd go a step further. Cut out the 2 padded hip caps (including the plastic) from of an old pair of pants and sew them permanently into pockets created in something like the Shock Doc shorts (the tight-fitting ones with the cup and velcro sock tabs) and wear those under your pants. That's what I wear for reffing and for inline skating. If I had my hip done, I'd wear that under my pants anytime I played. You can use just about any material to create pad pockets and if they're too tight to sew them into the inside, just put the pockets right on the outside.
-
I've never found pants that don't have that annoying gap in between the pads exposing your hip socket. So I just slip a circular piece of thin supplemental padding under compression shorts to keep them exactly where they need to be to fill that gap. You can do the same thing with a supplemental tailbone pad.
-
I just sent mine (O1) out to be installed on some Bauer MS-1 ice boots. How tight or loose would you suggest for that center bolt the first time I try them out? Currently pretty comfortable on my old skates with a 72-76-76-72 mm setup.
Is there any movement with that bolt fully tightened, or is that just like skating on traditional roller chassis?
-
Thanks, Per. I just found this new pair of Bauer (ice) MS-1s for $65 on eBay to have my MBs installed on them. The boots look identical to the Bauer RS (inlines) that I got a few weeks ago, except with an upgraded tongue. The Alkali 2s are going right back to Hockey Monkey because they're way too much skate for me; they felt totally foreign on my feet and are so stiff they seem like they'd take forever to break in even after baking. The Bauer RS felt just like my 22-year-old "Breakout 50s" as soon as I put them on. I'm still amazed at how stiff even low-level modern boots are. They seem to have the typical contoured bottoms that will fit the MB chasis.
-
I just received my 01s, thank you. That was a great decision to send them out in generic packaging instead of waiting for the custom packaging.
Question: The boots I was planning on using with them have perfectly flat bottoms that don't match the contoured angle of the base plates. What should be used to take up that space so that they fit flush to the boot?
Thanks in advance for your help.
-
1 hour ago, Isles12 said:The smaller wheels will accelerate faster but have a slower top speed.
That's actually perfect for the area I'm working with.
1 hour ago, Isles12 said:But only having 2 or 3 wheels in contact with the ground decreases stability too much for my liking.
That's what I was sort of expecting, but I didn't notice much reduction in stability going from 76-76-76-72 to 72-76-76-72.
Definitely more maneuverable.
1 hour ago, Isles12 said:I’m very interested in the marsblade r1 chassis so I have a set of those on pre-order
Ditto. I was planning on using my old Bauers until the MB show up, but they're falling apart on me and I'm not that optimistic about the posted MB delivery dates, based on my experience with their ice holders, although maybe that was because it was a new, first-generation product and not one already in production and on the market.
- 1
-
Thanks, Fellas...appreciate the input. So if I go with 72-76-72-68, that would be a little slower but more maneuverable than 76-80-76-72, correct?
-
I dug my 1997 Bauer "Breakout 50s" out from the back of a closet a few weeks ago. They're actually not bad, although I have nothing to compare them to. The wheel setup (that I don't remember doing) is 76-76-76-72, which felt OK, but kind of like skis compared ice runners...and they feel like they weigh about 10 lbs, each. Got some wheels in various sizes and changed to 72-76-76-72, which feels better and allows tighter turns. All the wheels I bought are 78A, because that seems like a good match on the rough-but-sealed concrete deck where I skate. Slightly softer could work well too, but I definitely wouldn't want anything harder with any less grip. (I'm 185 lbs.) I don't plan on playing roller hockey...just want to continue skating until the rinks open up again and keeping my mechanics as close to skating on ice as possible. The deck I skate on is roughly the dimensions of half an ice-rink neutral zone (split in half lengthwise...so blue line to blue line and boards to center face-off dot). I can do some drills, but I already run out of space quickly, so not looking for faster wheels...thinking that 68-72-72-68 might be optimal for my situation.
Both boots are quickly developing cracks after sitting in a closet for 20+ years, so I ordered a couple of pairs of skates in case I decide to put the Marsblades I ordered on one of them instead of on one of my old Lange boots. One of them is Bauer RS and the other is Alkali 2, (only because every place I looked was already out of lower-end models and the seller upgraded me to the A2s after notifying me that the Tour Code 3.ones I actually ordered first were sold out). The Bauers come with (harder 82A) 72-72-68-68 and the Alkali come with 80-80-76-76 Konixx Tachyon (+0) "Indoor" wheels...both have Hi-Lo frames. I can't find any reference to what KT +0 corresponds to on the traditional durometer scale, but I'm assuming they're something like 76A or 74A.
Questions:
1. Can I rocker Hi-Lo frames with 68-72-72-68 or 72-76-76-72? Any reason for me to stick with the Hi-Lo setup, instead?
2. The stock 80-80-76-76 will be faster and less maneuverable than the stock 72-72-68-68, right?
3. 76-80-80-76 will be a little slower but less stable than both of those rockered setups, right?
4. Probably 68-72-72-68 would be best for my needs, based on the info above, right?
5. How do the Marsblade FMT Ones compare with the Alkali R2s in case I decide to skate on the Bauers and have the MB put on the AR2s?
6. For you other dinosaurs, do you think Lange boots will support roller frames? Because it seems like roller frames put a lot more stress on the soles than ice holders (because the ice-steel load on the boot is distributed much wider and with less torque than the load from roller frames even though the ice steel itself is much thinner) and the Lange soles seem to be much thinner and much less reinforced than even the soles on my 1997 Bauer inlines. @pettererlandsson I know you said we can ask you anything about MB, but you've probably never seen Langes, right?
Any other advice and/or suggestions (other than "just try them all out and see") would be welcome.
Thanks in advance.
What elbow pad do you guys recommend?
in Ice Hockey Equipment
Posted · Report reply
I love these. There are several different model numbers that are identical for all intents and purposes and I believe they all come in regular and with the longer forearm pad. I use 9144 regulars to practice, play in 5066 longs, and use 8044 (with the plastic caps) in wheels on concrete.