-
Content Count
176 -
Joined
-
Last visited
-
Feedback
0%
Posts posted by kerr
-
-
I took a hard shoot to the side of the boot. The guy was 6'4" probably 300lbs. The boot was damaged but I didn't feel anything. It is the standard boot, so AfftonDad protection is not a worry. Boot getting damaged might be be a concern, but I think it was probably the spot the puck hit which was right on the edge where the sole and side "meet". Scott did the repair for free. He’s a good dude.
Damage:
https://imageshack.com/i/pae8nPOGj
Repair:
-
Initially, the t-nuts will settle, this depends on how rigid the midsole of the skate is. So, after a weeks use retighten them then again in a month. I never had the bolts loosen after doing this. Copper rivets are more malleable then t-nuts so this shouldn’t be a problem.
As for the front four rivets, I use a drill bit larger then the diameter of the rivet to remove most of the rivets head. Until I can punch the rivet out from the outside in. I had varying success with this method. Is difficult not to damage the holders.
-
There's no need for loctite from my experience.
-
I agree with loierev07. One thing to add is that sprungs allow you to be on 4, 3, 2, or 1 wheel(s). While the marsblade don't allow this. I notice the difference while stopping and making tight turns. The stopping control/feel with spungs is 10/10, marsblade 8/10, and rigid chassis 4/10.
- 1
-
I had sprungs. It's been about two years since I last skated on them. I currently have marsblade. I will write a review once I play some league games with them.
-
Eksempler, they were not advailable when I wrote that comment.
-
^ They have the same lie. The Z Pro has less toe rocker, more of a mid-heel, and a touch longer.
Harrow #3 (Drury) is on top:
Z Pro left:
-
They look a little too far back. I would prefer the chassis to be moved 1-2 cm forward. But you may like them the way they are.
-
I think they should add a lower cost package that only includes the chassis, spacers and tools.
That's a good idea and if they get a North American distributor. I would definitely give it a go if the price is fair. $300 is pricey but they come with the wheels I use but with limited information it would not be a smart buy. This would be a get product for a LTR.
-
They like a really nice alternative to sprungs. With sprungs no longer available, its a great time to launch the product. It does not appear they ship to the US though.
-
The Versteeg would be your best bet check out the pics here: http://www.modsquadhockey.com/forums/index.php?/topic/57617-warrior-stick-customizer-program/?view=findpost&p=889540
The Slovak is an extreme toe curve. As far a less open drury, the only thing that comes close is a Roenick Pro.
-
^With a hilo, this would give you a foward bias.
-
#1. And that is a nice looking chassis.
-
^^ I'm not sure what you're asking but heres the pic: http://i1089.photobucket.com/albums/i360/Miseaujeu/Stick-Flex--Length.jpg Also, I have had an Int. 70 flex AK and a Sr 75 flex Dolo and the AK was alot more whippy. I felt like a Sr. 60-65 flex.
-
How did you get the finger extension? And what was the upcharge?
Thanks
-
Hey Justin, well these skates be available boot only? I hope so since were both avid Hi-Lo users: http://www.modsquadhockey.com/forums/index.php?/topic/285-labeda-hummer-chasis/
-
Miseujeu,
Is it possible to get the dolomite not fused? I really want a 70 flex shaft.
Thanks
-
Comparing it to base makes even less sense! A two piece company that offers a few curves and flexes does not even compare to what Warrior is doing here.
Base has 8 curves, 4 of them with three lie options. And they have 5 pro custom curves which are available in only one handedness and lie. As far as flex goes, they seem to be willing to do custom flexes. I have been talking to them via email. I'll let you know how it goes if you want.
-
-
Forefoot width, heel width, and volume?
Thanks
-
One man's comfort, is another man's discomfort.
Could you give some specifics of the fit, so people don't get their hopes up unnecessarily?
-
I would be interested in boot only or with sprungs stock.
-
Are warrior 12inch gloves narrow or regular?
Thanks
-
Moos3, nice setup. What size skate and chassis?
Thanks
Base Hockey BC71 Malkin Curve
in Ice Hockey Equipment
Posted · Report reply
I think Base is just trying to get hype and generate orders with the 'available for a limited time' statement.