CCM Skate With TUUK Holders

[jdvn 8]

Can anyone tell me if the TUUK holders line up correctly on a tacks or ribcor boot? I've been wanting to switch over to CCM skates for some time now and this is probably the only thing stopping me from doing so.

Cheers.

[laserrobottime 148]

Tuuk Lightspeed 2 and Lightspeed Edge holders will line up with the SB4.0 holder holes.

[ChrisMolnar 14]

Line up perfectly. Put edge holders on the day my jetspeeds came in.

[DirtyDangle 7]

CCM/Reebok changed their riveting pattern to match Bauer's when the LS Edge holders were released. Anything after, and including, the RBZ will match.

[elpresidente99 1]

So you say you can just swap out the holder without drilling any holes??

Thanks

[Monty22 821]

So you say you can just swap out the holder without drilling any holes??

Thanks

Yes

[BRUINS_FAN_74 19]

The SB +4.0 holder is great

[DirtyDangle 7]

So you say you can just swap out the holder without drilling any holes??

Thanks

If you're mounting LS Edges then no drilling needed, you can rivet them right on.

If you're mounting LS2s you won't need to add any holes to mount the holder but you will need to drill a hole for the wrench that tightens the steel.