STEALTH BLADE

[jonnyboy 0]

hi, i just got my easton stealth grip intermediate 3 months ago and the blade just snapped, i dont want to have to buy a brand u stick so i wanted to just cut the shaft and put a new blade in it. where do i cut and what size or type of blade do i use?

[Miike 1]

Even though your new here... theres a 'Search' function at the top of the page. Use it... theres many topics about this.

[jonnyboy 0]

I CANT FIND ON ANY PREVIOUS TOPICS THE SIZE SR OR JR 4 A STEALTH INTERMEDIATE

[Miike 1]

http://www.modsquadhockey.com/index.php?showtopic=9313

Its not rocket science, theres a topic right on the first page in this Forum.

[jonnyboy 0]

but this topic is about the synergy is the synergy taper exactly the same as a stealth

[#28 0]

Since your stick is an intermediate, im pretty sure you would need an intermediate synthesis blade. Hold the synthesis blade next to the blade (or whats left of it) of your stealth and mark the area where the tenon would go into the shaft. This is a good starting point for cutting. Cut low on the shaft and check to see if the blade fits. If it doesn't fit, gradually cut higher on the shaft until the blade fits.

Type "stealthesis" into the search to see if any topics come up. I'm pretty sure I have seen a thread where someone converted a stealth to a tapered shaft.

[jonnyboy 0]

thank u #28

[ChrisGass9909 0]

did a search couldnt find results does the bauer vapor XX method (heat up fuse point and pull out) work with apollo?

[#28 0]

http://www.modsquadhockey.com/index.php?sh...&hl=stealthesis

look at the 6th post and click on the second link. It has a picture of a synthesis blade in a stealth. This should give you a good idea of where to cut.