KOHO revolution 4490 OPS

[bsimic23 0]

Hello

I'm little bit short on shafts. My V110 is cracking and have Koho revolution 4490 OPS. I'm currenty playing rollerhockey on asphalt so I don't want to destroy 4490 OPS, so I'm thinking of removing original blade from OPS. Is it possible, or has everyone done that before. I searched on topics before, but only new OPS are mentioned there!?

Can't find KOHO OPS.

[OkSt. 0]

I've removed a blade from an older Bauer OPS and I'ver heard that you can remove them from TPS and INNO sticks but I'm not sure about the

KOHO. Try looking for the seam where the hosel and shaft meet and heat up the shaft around the seam and 2-3 inches up from the seam. Once you have heated the shaft use a table vise grip or something similar to secure the shaft then grab the blade and pull. You could also try inserting a slender metal rod into the top of the shaft and try to beat out the blade.

[bsimic23 0]

If I menage to pull the blade out, is this blade still usable?

[OkSt. 0]

yeah, if the blade comes out easy you should still be able to use it with any tapered shaft.