Leif
-
Content Count
681 -
Joined
-
Last visited
-
Days Won
5 -
Feedback
N/A
Posts posted by Leif
-
-
I don’t see the point of using a flatter hollow wheel to flatten off the blade before doing a full resharpen with the desired wheel. That flatter hollow wheel will be the same price as the final wheel, and it will cut at the same rate. Okay, I have some spare wheels I don’t use, which I could use as steel munchers, so to speak, if the blades had a lot of damage that needed be stripped off. But not everyone has wheels they don’t normally use lying around.
My understanding is that a cross grind is done with a coarser wheel, so it takes more material off in each pass. Yup, the Sparx flat ring is indeed coarser than a standard ring.
-
On 11/14/2024 at 7:59 AM, swede said:No, actually the Cats are one size up.. I’m a size 7 Fit3 in vapors, and the Cats are 7.5 Wide..
Fit3 and EE Bauers are longer than Fit1, Fit2 and D width Bauers.
my toes are jammed against the toecap, so they are not to long. Will be perfect lengthwise after baking, the question is, if they will widen enough to fit my forefoot after baking.
my only issue with the Bauers is that the toecap are to narrow and dig in between the first and second joint on my big toes. The Bauers are punched right behind the toecap, to accomodate bunions i have on my big toe joint.
I had problems with Bauer rubbing the sides of my big toes, it could be painful, even with customs. Those hard toecaps are horrid.
My True TF9 opened up noticeably after baking. but were still tight round the forefoot. Each time I skated, they felt just a bit looser and today they are like cosy slippers. A year later I bought TF9 inlines, and the weird thing is right away they felt just like the older TF9. So either they were a tad wider, or my feet gradually adapted i.e. changed shape. Unlike Bauer, the side pressure from the TF9 was spread out over a sizeable area. Anyway, yes the TF9 forefoot expands a little bit when heat moulding. It has a thin plastic skin over a carbon fibre shell, except at the very front where it is thick plastic. I think Cats are pretty much the same. On this page you’ll find a photo showing the construction of the Cat Pro:
You won’t get more volume, but it should squash down a bit.
-
On 11/6/2024 at 11:55 PM, iceman8310 said:Having heel pocket issues on my right skate. Any suggestions on how to fix. They already redid the skates
What are heel pocket issues?
I had a bit of unwanted space by my ankle on one TF9 skate, so I rebaked, wrapped the heel in plastic film, then wrapped the heel in a towel, and used a length of wood each side, with two clamps, to compress the heel while it cooled. It’s now tip top. The custom boots are of course just as mouldable. I used Irwin clamps which can be attacked with one hand, very useful for those of us with less than three hands.
-
6 hours ago, Left Wing King said:One last question, is there a difference between the ice and roller boots, as if there isn't I'll get a conversion done.
I have both TF9 ice and roller skates, the boots look and feel identical.
-
My experience is that they are very mouldable. I spot heated the top area of the facing, and it could be folded like paper.
When I rebaked my TF9 at home, I wrapped the heels with plastic film, then I wrapped a towel round, placed a slat of wood each side, and used two clamps to pull the wood pieces together, and compress the heel. I have very narrow lower leg bones. The toe area was a bit tight, but it expanded a bit on baking. They can be rebaked multiple times, so try the film wrap first. Obviously only partially tighten the laces, I think they say about 2/3 normal tension at most, but check the instructions.
It’d be interesting to hear how they work out for you. I now have True ice and roller skates.
-
7 hours ago, Left Wing King said:Cheers for the info, the only issue is they don't sell the TFs here in the UK and they would try and obviously sell you what they stock (which I would to) So I'd have to buy them and take them in for a baking, but that could be lost money. I'm still hoping my Nexus can be repaired
That’s not true, so to speak, the Ice Barn in Basingstoke are the main UK True dealer, they have TF9 stock. However they only have size 5.5R, not W. Worth a visit if you’re nearish.
They do compress and expand quite a bit, but that might be insufficient if you’re Bauer 6 EE. I’m Bauer 7E, True TF9 6.5R. They are most formable in the middle and heel. I used clamps over a towel to compress the heel, and shims at the top on the outside so I could get them on easily.
-
I picked up a pair of TF9 rollers a couple of days ago, and tried them out today for half an hour on a local outdoor basketball court. The surface is small stones in bitumen packed flat. I put some old wheels and bearings on, to keep the originals for indoor hockey. They felt very similar to my Bauer Vapor X2.9 skates, but with a far better and more comfortable fit. They are almost like slippers. I shimmed the outside facings when heat moulding. I still have a very sore ankle from skating in the Bauers a week ago. When doing crossovers in the Bauers, it felt like something was flexing. The Trues don’t have that sensation. These can still be picked up for the price of mid range roller hockey skates, a bargain IMO. I still far prefer ice, as falling on tarmac, even with body armour, can hurt.
Does anyone have ideas on how to protect them from abrasions when skating on hard surfaces? My Bauers got some bad road rash.
-
42 minutes ago, eugene8080 said:what d3o pads do you use? I looked that the Xion d3o shorts, I've found that a lot of d30 shorts were designed for motocycle or mountain bikers and lack full tailbone protection (due to the need to sit). Did you find that the tail bone protection was sufficient? I was looking to use these (along witha separate cup) for light protection instead of rollar hockey girdles for shinny and pond hockey. Do you think that would work?
I wear these:
https://www.stonesports.com/products/xion-shorts-freeride-d3o-men-l
Yes they are ideal for roller and ice skating. Before I bought these, I fell on my coccyx several times during public skating at the local rink. I was close to seriously injured, the second time and when I woke up the next day I was unable to walk, I could only crawl on my front. Fortunately I could walk by the evening, but like a cripple. It took me a week to recover. Since I bought the shorts, I have fallen countless times on my coccyx, it hurts, but the pain disappears in seconds, and I can skate again. It is a very good product. A friend who does stunts in fims, he was in Lord of the Rings, says they are best pads for stunt artists.
You can also buy a D3O pad and sew it into an undergarment that you wear over your underpants, and under your trousers.
-
1
-
-
On 8/12/2024 at 7:10 AM, shoot_the_goalie said:Out of curiosity has anyone used this machine? How does it compare to the Sparx?
There is a review on YouTube:
It is somewhat negative, but it’s only one person’s viewpoint. Pricing it above a tried and tested machine with a stellar reputation is courageous.
-
4 hours ago, BenBreeg said:TBH, buying footbeds separate seems like an upsell when you are in the store. If their position is the skate would be best with it, the skate should come with it, especially as you get to the higher price points.
when my son was in youth and junior skates, the Pure associate would automatically bring over Superfeet and try to upsell them. So a parent is buying $200ish skates and here comes a kid telling them, “they really should get these because the stock footbed isn’t that good”, by the way, that adds another 25% to your total.
I was chatting to one of the owners of our local hockey shop, he said he hated Speedplates, and loved Superfeet. I loathe Superfeet, I find them very uncomfortable. Speedplates on the other hand are amazing as they dramatically improve comfort and ice feel. Basically they’re best to leave it to the customer to decide.
-
On 4/21/2024 at 2:50 PM, pgeorgan said:I'm hearing on Reddit that Bauer has revamped their scanning process and improved their custom skate offerings, to be debuted alongside the new Bauer Shadows. Can anyone confirm this?
I heard from a local shop that Speedplates are being replaced with something more custom, but they didn’t know details then. They were due to fly to Sweden I think, for a Bauer presentation. I bought some discounted Speedplates while they were still available (not from that shop, they weren’t trying to get me to buy). They also seemed quite impressed by the new Bauer sharpener, but didn’t know the price.
-
1 hour ago, stick9 said:You know that like a real thing now, right? It's not just some marketing BS.... No amount wear will get that boot to conform to your foot.
https://composites.pfsfabrics.com/what-is-curv/
My Supreme 2S Pro skates have a CarbonCurv shell, having baked them three times, if they are thermoformable it is very subtle. My guess is the ankle foams benefit far more from baking. I believe they are thermoformable with enough heat and pressure.
-
Blimey, and that machine costs serious money too. ☹️
-
7 hours ago, Vet88 said:Looks like a complete redesign, imho it was necessary due to the many many problems with the Swedish model. I have a prosharp skatepal pro 3 (which is built on the same platform as the home version) that I am gradually modifying to fix the cheap build sh*t issues.
A local shop had a Skate Pal Pro 3, as well as a hand sharpener. It sat unused under a table, customers always asked for a hand sharpen and they had some issues with it. Eventually they sold it. I had a ProSharp BAT gauge that was out by a few thou, and a ProSharp depth gauge that was a cheap and nasty POS. Another local shop has a higher end ProSharp machine which seems to be excellent. What issues do you have with your SP3?
I’m very impressed with the quality of my Sparx. One sample tells us nothing, but online feedback is incredibly positive. They once had an issue with some wheels not being recognised by early machines, that was fixed with a firmware update. I’m not aware of other issues, though I wonder how long they last. Hand machines last decades.
-
5 hours ago, pgeorgan said:Of note: it claims to have "Auto-Sharpening Height & Self-Centering".
How did I miss that! Thanks.
That would be significant when sharpening other peoples skates. Though to be honest I find that I don’t need to recentre the unit with friends skates.
-
Some features:
- Flat wheels (cross grind) available.
- Firmware update via wifi.
- Blade clamp operated by a touch button, not manually.
- Displays the current wheel hollow and usage.
- Displays the current user profile: preferred hollow, number of cycles and blade type i.e. goalie/player.
-
13 hours ago, krisdrum said:Is it just an updated ProSharp Home?
The ProSharp Home was made in Sweden, which explains the high price. I assume this is pretty much the same beast but made in China to make it competitive.
Incidentally, if you Google “prosharp advantedge home machine” you can find the user manual. I won’t paste the link in case it violates the forum rules.
-
On 3/19/2024 at 12:59 AM, VegasHockey said:The brands don't care. They are trying to make two fit offerings that cover 90% of players, and anyone who needs something more narrow or wide can order custom.
As I said earlier, Bauer custom won’t fit many people. I’m repeating this as I am angry that the Bauer marketing is deception, and screwed my skating for years, and people need to be aware of this.
I’ve talked to a lot of people, including shop staff, and the concensus is that CCM is midway between Bauer and True for mouldability, so I’m not convinced CCM custom would fit me either.
-
8 hours ago, mojo122 said:From a retail fitting perspective Bauer's 3-Fit system is better than the previous 3 line single fit lineup. For those that have issues there's always custom.
Except that custom doesn’t work for many people. Custom is essentially a pair of stock skates, individually sized to each foot in width and length. with a bit of pressure and heat applied. If your feet are far from Bauer shaped, the result will not be a good fit. If you have Bauer shaped feet, but there’s a bump or two that makes stock skates painful, or you are just a bit off Bauer shaped feet, then custom is ideal.
-
1
-
-
For inline skating I bought some ankle sleeves made by Powerslide. Not ideal, but they might help.
https://powerslide.com/products/footie-high-2mm
There are of course other brands.
I rebaked my right skate today, and use a pair of ratchet clamps and a piece of wood each side of the skate, to tighten the ankle a bit. I placed a towel between the skate and the wood to even out the pressure. I don’t think Bauer skate shells are thermoformable, just the foams, but you might try this, assuming it is okay to rebake the skates.
Alternatively, True skates are very thermoformable, CCM are said to be thermoformable but I’ve never owned any.
-
It took me quite a few hours to get used to my new skates, which had a different profile and pitch. I now love them. Hence I agree with the others here.
-
18 minutes ago, Sniper9 said:I think @VegasHockeyknows all about the history of svh and true....
Don’t doubt it. There a lot of people here who know more than me about hockey etc. However, if you ever need to know about the quantum theory of solids, and mycology, just ask …
-
1
-
-
17 hours ago, VegasHockey said:Scott started by initially building custom skates to establish himself in the market and provide players with an option for a better fitting and performing skate. Not saying that other skates didn't offer high performance, but some players were skating in significant pain, even in the custom skates, and many of them considered hanging up their skates due to constant foot problems. Once he built up the brand enough, he sold it to TRUE Temper, as they were looking to expand into the hockey skate market and had extensive access to research, development, engineering, materials, and distribution. He is a very smart individual and has a bachelor of Science Degree and a Masters in Biomechanics. What I find most fascinating about Scott is that, while other brands are constantly duplicating similar efforts in design, and getting similar results, he likes to think outside the box.
His family were big in speed skating, and he got to national level. The first skates he made were speed skates, so perhaps some of the ideas he has brought to hockey skates came from the speed skating world, as well as his later involvement in MLX. And as you mention, perhaps his biomechanics background helped. I can’t help thinking that the popularity of Bauer in the UK, compared to CCM and True, is due in large part to availability.
-
On 2/25/2024 at 3:38 PM, start_today said:For what it’s worth, I generally wear 15” gloves, but felt 15” Trues were too long in the fingers when I tried them on, and a touch roomier that I wanted. They were 7X and 9X. I honestly don’t know if they have had different iterations of those yet.
I assume glove fits change slightly person to person, depending on the size ratio of fingers to hands.
This is strange as they have arrived, and they are very snug and my fingers touch the ends. So the opposite to your experience! You must be right about size ratio of hands. I’ve always worn size 13” gloves (Bauer and Warrior, low and mid range) that are slightly loose. Never mind, it’s only a 15 mile drive this Saturday to do an exchange.
Speed plate 2.0
in Ice Hockey Equipment
Posted · Report reply
There’s a skate shop in Gosport, England called Everglides that does custom insoles.
https://everglides.co.uk/services/custom-insoles/
Maybe you can find the same product at a shop near you.
I stocked up with a new pair of Speedplates when I heard they were discontinued, I use them in my ice and roller skates. I can’t imagine skating without them. There are still a few pair lying around, albeit with shipping fees and tax from overseas.