Dolomite one piece, turning it into two piece

[g0o0nshow 0]

I tried the search tool but i couldnt really find what i was looking for, but i think i read it some where on here. Is it possible to heat the blade of a dolomite one piece and pull the blade out? If so could some one tell me how its done. Ive heard of the blade just flying out but i have an old one piece i dont use and im trying to get the blade.

[whbd18 0]

Heat it up at the fuse point, the blade should come out pretty easily since the blades come loose on the dolomite alot.

[g0o0nshow 0]

Thanks im going to try it now

[whbd18 0]

I would use a knife and cut away at some of the epoxy in the fuse point before you start heating it up though, might make it alot easier to come out.

[ThePurpleCobra 0]

Can you do this on other sticks as well... i have the 7k sickick and i like the curve i have but the stick its self has got to go

[whbd18 0]

Can you do this on other sticks as well... i have the 7k sickick and i like the curve i have but the stick its self has got to go

I have a 7K Sickick and there is no way the blade could be removed without cutting it off.

By the way, what dont you like about yours. I love mine, the only downside is its almost broken after 10 ice times, but it has lasted longer so far than 4 other 7K/6K RBKs I got a couple months ago.

[ThePurpleCobra 0]

yeah the only reason I dont like it is because it always feels like its going to break. It seems like the first stealth that came out... mine will break anytime. But we'll see

[ThePurpleCobra 0]

Could you also maybe do it to a hex-1?

[DamnLocust 0]

I tried with my prostock L-2 (basically an M-1 painted red) and couldn't get it to budge. I wound up cutting about 2 1/2" above the fuse point and now I have a synthesis blade in it with a strip of tape on the tenon.

[ThePurpleCobra 0]

is the fuse point easy to point out on the Hex-1/L-2?

[DamnLocust 0]

i can't recall on the hex (my friend had one) but on my l-2 it was right in your face.

[hockechamp14 0]

innovative designed thier sticks with a fuse point so you could heat it up and take out the blade. They sold them as one-pieces though. Sort of like the L-2.

I'm guessing warrior is doing something similar to that because the sticks are the same.

[tml67 0]

Can you do this on other sticks as well... i have the 7k sickick and i like the curve i have but the stick its self has got to go

I removed the blade from my XN10 with a lot of difficulty. It was my first time doing it so that might explain the difficult part.

[king_paris 0]

Is it possible to do this with a vector v110 OPS ? I can see the fuse point.