mission L2 shaft

[texanhockey 0]

well i picked up an L2 for really cheap but dont like the blaade patterns. can i put my easton sakic tapered blade in it

[Swiss17 0]

Yes

[texanhockey 0]

that easy? have you actually done it. the top part on the L2 looks alot smaller

[Eazy_b97 1]

It's very simple, just fire it in and go. May want to use some tape, might be a little tight, but they are designed to work with other tapered blades as well.

[Joker518 0]

The senior sized L2 should fit standard tapered blades... There can be some slight deviantion from manufacturer to manufactuer in terms of what that standard size actually is however. You may need to carefully sand down the hosel of the blade... Just be sure you have a nice TIGHT fit or you may get some blade chatter after a few shifts.

[toroytorero 0]

I have an L2 and easton blades both wood/comp fit fine. no issues, just needs to be a tapered blade. What easton pattern are you using??

[Viking 1]

can i put my easton sakic tapered blade in it

[Chadd 916]

As long as it isn't an intermediate Easton blade, you should be fine. Mission uses the same blades for their junior and int shafts, Easton junior blades will fit that. Senior blades from either manufacturer will work fine in either senior shaft.