Conventional 608 bearing on Vector 10.0 axles

[nsabino 0]

Hi,

Due to the fact that the axles on the CCM Vector 10.0 is thicker than the conventional spacers of 608 bearings, how or is it possible to use these conventional bearings. Note: the Vector 10.0's come with micro bearings,

all and any help is appreciated.

Regards,

Nelson

[Patrick67 1]

You swap the spacers, and use ufo spacers instead.

They ain't called ufo spacers, but they look like.... small ufo's...

[nsabino 0]

You swap the spacers, and use ufo spacers instead.

They ain't called ufo spacers, but they look like.... small ufo's...

Are these what you mean?

http://www.inlinewarehouse.com/descpage.html?pcode=SFBS

Thanks.

[Patrick67 1]

Yes, precisely those.

[nsabino 0]

Yes, precisely those.

Thanks alot for your help Patrick.

Regards,

Nelson

[fatwabbit 93]

floating spacers i believe they are called. Just swap them out, you should be ok... I've swap between my old 608s and 688s when I was playing hockey or just skating in the carpark.