grrrr fyi

[riotgear 4]

Dolomite 2 Tapered blade DOES NOT fit in a Synergy II Shaft. I just found that out the hard way :/

[cougarscaptain87 12]

are they both sr/sr or jr/jr? i just installed one for a customer sr in a sr and it worked just fine

[Chadd 916]

They fit just fine as long as you use the right size blade.

[ATLstealth09 0]

I think it does fit, just make sure that you have the right size (Sr. for Sr., Jr. for Jr.) blade for the shaft and that you have melted the glue completely. I have tried it, and it works fine.

[riotgear 4]

sr is a little loose in the synergy 2 shaft. im not dumb, i know sr goes in sr

[DCott 0]

put a strip of tape on the tenon

[riotgear 4]

i just got the dolo 2 shaft to fix the problem

[ATLstealth09 0]

I second the tape... I put a strip in there regardless.

But since you got a Dolo, whatever. Not a problem anymore.

[Chadd 916]

I second the tape... I put a strip in there regardless.

That can stretch out the shaft if it isn't needed. Only put tape on if it's loose.

[ATLstealth09 0]

I second the tape... I put a strip in there regardless.

That can stretch out the shaft if it isn't needed. Only put tape on if it's loose.

I'll keep that in mind next time.