custom+ to LS2

[Sid 3]

I am thinking of putting LS2 on my Grafs 609. I have already had custom + put on. I saw somewhere there may be an issue with the holes drilled for the custom going to LS2. Any input would be great.

Thanks Sid

[DamnLocust 0]

The holes will need to be widened to put the LS2s on.

I just went from 709s with C+ to Ultra G70s with LS2.... it's a bit of an adjustment, as the LS2 is a stiffer holder.

The pitch of the LS is also neutral, whereas the C+ is on a slight heel pitch.

I definitely feel like I'm getting more glide out of the new skates. Energy transfer is better (likely a combination of the stiffer boot and holder), but it's been a little bit awkward cutting as well as crossing over when backskating.

[cougarscaptain87 12]

the custom plus is a softer plastic so the holder will feel more "springy" as to where the lightspeed holder is more rigid. also the lightspeed has a 3 mm higher heel so it will feel more on your toes compared to the custom + but also keep in mind it is only 3mm not a huge difference, i have gone back and forth without problems adjusting.

[Sid 3]

I was talking with the service guy at my LHS asking about the switch. He said don't do it cause if you over tighten the bolt it will slip. I had read this was a problem in the beginning but I also thought this issue had been solved later on? Could someone clearify this. Has this been sloved with LS2.1 power?

Thanks sid

[big_bt 0]

The holes will need to be widened to put the LS2s on.

I just went from 709s with C+ to Ultra G70s with LS2.... it's a bit of an adjustment, as the LS2 is a stiffer holder.

The pitch of the LS is also neutral, whereas the C+ is on a slight heel pitch.

I definitely feel like I'm getting more glide out of the new skates. Energy transfer is better (likely a combination of the stiffer boot and holder), but it's been a little bit awkward cutting as well as crossing over when backskating.

did you get a chance to skate on the cobra 5000's ?

I am in the exact situation as you concerning skates, but I put LS2's on my 709's. And I am going with the G70's this Summer and was wondering how the cobra's held up.

[DamnLocust 0]

Nope, I never did get a chance to skate on the cobras. Try out the cobras for a couple of weeks when you get the Ultras. If they don't work out, you can swap the LS2s from your 709s or get another set.