broken blade

[daniel91 0]

i just broke my warrior royale blade but just pieces are falling off. where should I cut it and what size blade should I use (jr or sr) if I can even put a blade in?

[YouTuuk 0]

i just broke my warrior royale blade but just pieces are falling off. where should I cut it and what size blade should I use (jr or sr) if I can even put a blade in?

you talk about the blade, but then say "where should I cut it" are you meaning where should you cut the shaft? I am assuming your Warrior blade is "tapered" so most likley you will have to stick in another "tapered" blade and depending on the shaft usually I like cutting a little bit at a time and keep going up until it fits...

There are many threads on this subject just do a search on "cutting OPS"

[fatwabbit 93]

can you actually salvage the blade? use epoxy... a few threads on how to apply it...

Good to see you're on this YouTuuk.

[YouTuuk 0]

can you actually salvage the blade? use epoxy... a few threads on how to apply it...

Good to see you're on this YouTuuk.

Ha, ha I was actually going to put on my original post, "where is fatwabbit when you need him..." because it appears from the original post that this had "fatwabbit epoxy fix" written all over it - I know you spend alot of time honing your epoxy skills over the years and we appretiate you knowlege. But then the original poster started talking about cutting and stuff so I thought I would give my 2 cents since nobody posted yet.

[fatwabbit 93]

epoxy... miracle cure for all composite breaks...