Graf Torque Driver

[Riggo 0]

Where can I purchase a certified Graf torque driver for use on the Cobra 5000 blade attachment nut? Thank you.

[english15x 3]

do you mean like a screwdriver to take the RMS screws out of your skates?

if that's so all you need it a torque screw driver found at a local hardware store, or a set or torque keys.

[Riggo 0]

Not the RMS screws. The single nut that holds the blade to the holder.

[JR Boucicaut 3815]

Nobody I know has ever used a torque driver, just a big screwdriver does the trick.

[english15x 3]

Nobody I know has ever used a torque driver, just a big screwdriver does the trick.

yes, sorry I was confused. there's no official tool, it's just a regular screw head.

[JR Boucicaut 3815]

Actually, no, they recommend a torque driver.

[english15x 3]

that's weird. why would you bother using one, seeing as it just needs a flat head driver.

[VakarLajos 5]

that's weird. why would you bother using one, seeing as it just needs a flat head driver.

That's all we use. The thicker the head on it, the better. It's not a complicated process or anything, just need to make sure you don't over-tighten it (same as with the Tuuk holders).