Mission Steel Question

[Ratfinklives 0]

Hey all,

Was wondering if anyone knew of a place online that sold Mission Steel for the Pitch 3 holder. The steel is size 280 and is snapped at the pitch adjustment point. It's been a bit difficult trying to figure out how to work a warranty (If there is one) with the Nike/Bauer purchase of Mission. I've looked online to no avail, but was hoping someone else may have had more luck in the past.

Also would not be opposed to buying some off an old pair of skates someone may have lying around.

Thanks in advance

[Taki27 0]

Round bolts or square bolts? The original Pitch 3s were round. They were updated (at JRs request) to Square. If they are the round ones, then I can sell you the pair of runners for pretty cheap.

[Ratfinklives 0]

Taki,

They are the square variety I'm afraid. Did the change in bolts effect the steel or just the holder? I'm not familiar with the change. They are the holders from AG120, so they would be the most modern version.

[Chadd 916]

I have a full set of 280 that is virtually new, steel and holder. PM me if you want them.

[Taki27 0]

Ratfink,

I think they are different, but I am not sure. JR would know, since he suggested the change to the holder.

[Chadd 916]

Ratfink,

I think they are different, but I am not sure. JR would know, since he suggested the change to the holder.

I compared my first model year S500 with a Shift2.

The steel is identical with both versions. The difference is the head of the nut is square on the newer version and round on the older. The plastic is also shaped differently for the square head, but the steel is exactly the same.

[Ratfinklives 0]

Chadd/Taki,

Do either of you still have this steel? I tried messaging both of you guys, but not sure if they went through properly. I'd like to buy either, please PM me if you still have it.

Thanks