crack along my warrior ops blade

[kenneth 5]

so i noticed that there is a crack along the bottom of the stick from the heel to almost the fuse point, it looks almost like the blade is two halves fused together, is there any type i of resin or glue i could apply along the crack to prevent it's untimely death?

[syko_hockey 0]

so i noticed that there is a crack along the bottom of the stick from the heel to almost the fuse point, it looks almost like the blade is two halves fused together, is there any type i of resin or glue i could apply along the crack to prevent it's untimely death?

I also had this happen and don't know what to do although I now put a stip of tape on the bottom of the blade

[mik3 1]

Some epoxy should help you out for a little bit.

[ZombieAttack27 1]

Some epoxy should help you out for a little bit.

Some epoxy is better than others though, I filled up the hole in the heel of my '08 u+ after the plastic insert fell out, and it looks alot like plastic when it was completely cured. After one slap shot in my hs game, it shattered like glass.... i was surprised because I was under the impression the epoxy compressed like a dense rubber or something.

before that, I used some different stuff that was gooier and grey on the toe of a different OPS and the toes of my skates... much better