Shafts and Blades: One95, Synergy Gold, and more

[steelnation248 101]

All shipping prices are within the Con. US only. For anywhere else, contact me for a quote.

Shafts:

Bauer One95 Chris Neil pro stock "G3" shaft

- 85 flex

- Unconverted so the length will vary, heel to end length is ~58"

- Grip

- Condition is 8/10

I picked up this stick a little bit ago to convert it into a shaft. The blade is cracked along the bottom. The blade could be repaired it someone wanted. It has a curve similar to the Bauer retail P14 pattern (can take pics if desired.) I never ended up converting the stick because I ended up picking up some other items and it got pushed aside. The shaft of the blade is very strong structurally. There are some paint chips around the hosel area. Some are longer but they do not effect the shaft strength. It is not a true One95 because it is the G3 construction. I'm just looking to get back what I paid for it.

- Looking for $40 shipped

http://imageshack.us/f/141/1952j.jpg/

http://imageshack.us/f/831/1951j.jpg/

Easton Synergy Gold standard shaft (from broken OPS)

- 100 flex

- ~49.5"

- Grip

- Condition is 8.5/10

I had picked this shaft up a couple of years ago and used it maybe once or twice. It is too stiff for my liking. It fits standard blades (the Easton Synergy Gold and Silver's were a fused standard blade/shaft setup.) The shaft is very sturdy. I do not see anything wrong with is structurally. There is some paint chips, stains from tape, and glue residue on it. I know some people love the Synergy Gold's so I was just seeing if anyone would be interested in the shaft.

- Not sure what to ask for on this one, if interested, PM me.

http://imageshack.us/f/651/syn2s.jpg/

http://imageshack.us/f/163/syn1j.jpg/

Harrow 300 tapered shaft

- 75 Flex

- Cut down 2.5" so it is now 52.5" total

- Matte Rubber Grip

- Condition is 9.5/10

I only used it at about 3 sticks and pucks, never seen in game use. Has a couple very, very minor paint chips. Most are tiny. To be honest, I think the some are from storage/transportation rather than actual use.

- Looking for $40 shipped

http://imageshack.us/f/845/har2.jpg/

http://imageshack.us/f/141/har1s.jpg/

Easton SE16 tapered shaft (from broken OPS)

- 85 flex

- 53" plus 2" wood plug

- Non Grip

- Condition is ... hard to rate. See below

I picked up this and converted it to a shaft. I lightly sanded down the paint and spray painted it full black. There was one spot where it looked like it was stepped on by a skate. It wasn't very deep but I put some epoxy in it just in case. It doesn't effect it structurally. After I spray painted it black, I removed the tape from the handle to retape it but it took off a lot of the black. I am in the process of removing the black spray paint so the top is silver and the bottom is still black, with some black spots randomly on the shaft.

- Looking for $15 + shipping

http://imageshack.us/f/542/se16.jpg/

TPS R2 tapered shaft (model CS8)

- Regular flex

- 51" and I am unsure of it original length

- Non Grip

- Condition is 6/10

The shaft is structurally very strong. However, it is not the best looking stick cosmetically. Paint chips are pretty prominent throughout. There also is one small chip in the shape. It does not affect the shafts strength though.

- Looking for $15 + shipping

http://imageshack.us/f/688/r22hp.jpg/

http://imageshack.us/f/832/r21ka.jpg/

Reebok 10k pro stock tapered shaft [from broken OPS (A3T code)]

- 85 flex

- ~47"

- Non Grip

- Condition is 8.5/10

I converted this to a shaft myself. The shaft is very strong. It kicked hard when I used it at a few sticks and puck sessions. Some of the logo has started to peel away but there is no damage to the shaft. No gouges or anything.

- Looking for $25 + shipping

http://imageshack.us/f/42/ree2.jpg/

http://imageshack.us/f/401/ree1.jpg/

Blades:

(All blades are RH)

Bauer TotalONE P92 standard blade

- 6 lie (Bauer scale)

- Condition is 8/10

I used this blade for a little bit, mostly at stick and puck. It is very stiff. There are a couple cosmetic digs on it that don't effect the stiffness at all. The worse looking one is a scratch along the heel on the backside. I will include a picture of it below.

- Looking for $30 + shipping

http://imageshack.us/f/442/t11oh.jpg/

http://imageshack.us/f/708/t12e.jpg/

http://imageshack.us/f/443/t1sa.jpg/

2x Bauer One95 P92 standard blades

- 6 lie (Bauer scale)

- Condition is new: 10/10

I picked up 3 of the these blades awhile back from a member and only used one of them. The other two are brand new. The decals were blacked out by the previous owner but it says on the tenon that they are One95 blades. Picture will be included showing that below. I know these blades are beloved by some and I'm not really to sure if I want to sell them but I figured I'd throw them up to see if there is interest.

- Looking for $50 + shipping, each -> NOW ON EBAY

http://imageshack.us/f/10/195b1.jpg/

http://imageshack.us/f/851/195b2.jpg/

http://imageshack.us/f/194/195b3.jpg/

TPS Karpovtsev pro stock tapered blade

- About 5 lie (Easton scale)

- Condition is 8.5/10

I bought this blade from the member Ranger-#8. It is a short blade, about the same size of an Iginla curve. The curve is straight then kinks about mid-toe. The toe is open slightly. Blade is strong, however some of the paint has started to come off.

- Looking for $25 + shipping

http://imageshack.us/f/818/karpf.jpg/

http://imageshack.us/f/813/karpb.jpg/

http://imageshack.us/f/37/karpc.jpg/

Reebok M-14 tapered blade

- About 5 lie (Easton scale)

- Condition is 9/10

The M-14 curve is similar to the Cammalleri/Stamkos/Burrow retail curves. Pretty straight, closed, mid-heel. I bought this off the member kklinder. I used it once on the pond. It is very strong. The only real thing is a couple tiny hair line scratches. Some of the Reebok decal is starting to come up too. Nothing that harms the blade structurally.

- Looking for $15 shipped

http://imageshack.us/f/820/m14fp.jpg/

http://imageshack.us/f/811/m14bi.jpg/

http://imageshack.us/f/560/m14c.jpg/

If you have any questions, feel free to PM me.

[steelnation248 101]

Sale pending on the 10k and Synergy shafts.

...and sold!

[dsjunior1388 81]

Nevermind, misread.

[steelnation248 101]

TotalONE blade sold!

I am open to offers, just let me know!

[steelnation248 101]

TPS blade and TPS shaft are sold. One95 blades are now on ebay.

Prices lowered on the remaining items. Feel free to make me an offer as well.