Leaderboard

My haul from the Bruins Sale. It was nice meeting the_game. Barkowski 4500 and nameplate (misprint) NBH/Warrior Frankenpads Marchand Laundry Bag Warsofsky Warrior Luxes WC Shell Merlot and White Practice Jerseys Ferrence Bauer Supreme Pants Zanon TotalOnes

Finally done..

My first conversion I finished tonight. Came out great in my eyes. Chassis is a little dated but is clean and still going strong. (Although I'd love to try the 80/76 setup eventually. The hummr 80mm chassis is intriguing but it makes my wheelbase too long on my Size 7 boot. These frames were from my old 2003 mission RPM's which were always too narrow for my foot. The holes in the chassis were kinda large so I chose a washer and lock washer combo with some loctite. Overkill Maybe. Went with slightly longer bolts than what was recommendations on here. Ended up with 3/8" for the very front holes, 1/2" for the whole middle section and 3/4 for the last 2 rear plus an addition washer. Might have been able to swing a 1/2 incher back there with one washer but the longer bolt seemed to lock in more secure being that was the thickest spot between boot and chassis. All holes were filled (that's what I said) with epoxy. Kinda messy but the plastic syringe thingy worked well as noted on one of the threads I found here. Can't wait to skate on em!

Parts finally arrived now its just getting over worrying about wrecking them before i start.

Graf 707's with Labeda Hum'er Chassis.

Didn't have the white/orange addictions for the fronts, but oh well. They feel phenominal

Pro stock totalone, and some Hum'ers

Oldtimer's latest conversion and what could be one of the most expensive conversions to date!!

First conversion. T-nuts. Justin Falk pro stock one95's Labeda Hum'er Revision Variant Plus Revision Abec 7 Bearings

Hey guys, Long time reader and first time poster. Just wanted to share some of my conversions with you. Bauer Supreme One95 // Mission Vanguard Chassis // RR Splits // Bevo ABEC 9's Bauer Supreme One 70 // Mission Vanguard Chasis // Labeda Millenniums // Bevo ABEC 9 Bearings The one95's are pro stock and came extra stiff with a double thick tongue. I switched it out for an after market and cleaned them up a bit. I've mounted Easton s12's and grafs in the past but always end up going back to the supreme line.