Klemer11

Thanks mck .Did not check how the spinner was seated. I am confident that i'm reading and using the bat gauge correct and am getting square edges. With the 100/50 it was the bottom edge that was getting much sharper with a visibly deeper hollow toward that edge. To test the spinner I flipped it around, redressed the wheel, changed height on side knobs of holder to rematch where spinner dressed wheel and ended up with the same hollow just opposite (top edge super sharp).With the spinner in with the numbers up the flat dresses the wheel slightly lower than center of the stone.

Is anyone having trouble with their FBV mini spinners. I've been having difficulty getting equally sharp edges even though the edges are the same length ( according to bat gauge). With my 100/50 spinner I can clearly see a steeper edge on one side of the flat. When put on a skate blade that edge is very sharp and seems to stay sharp but the other edge feels about half as keen and needs to be sharpened after about an hour on the ice. The hollow is also deeper on that side of the blade. When compared to the 90/75 visually the hollow on the 100/50 is deeper, but I'm also getting one sharper edge with my 90/75. Is this common or does anyone have any tips to help me out or is their a chance I got a bad spinner. thanks.