changing curve

[clinic 0]

I wanna know how i can change/shape or do whatever to my blade to make my modo look like an iggy. i know that it'll ruin the durability, but what the hey, if i think it'll ruin it too much then i won't do it. any info would be greatly appreciated.

[Eazy_b97 1]

Do you know what Iggy pattern looks like? You could invest in a pro-type curver that they sell on ebay where it'll take the measurements more accurate. Are you looking for the actual process? Most often I just heat it up and do it by eye. if your going to heat it up once why not do it as close as possible then make alterations after to get it exactly how you want it.

[clinic 0]

yeah, to both those questions. i have an iggy in front of me, but what i want is like a step by step process on how to curve it, while retaining maximum durability. if it was a wood blade, i wouldn't even bother asking, but since it's a composite...

[kosydar 0]

If its composite, I wouldn't mess with it. It just isn't worth it.

[Chadd 916]

Don't bother, it's not worth all of the work and if you make a slight mistake, the blade is toast.

[clinic 0]

mmkay i'll just take you guy's(spelling?) word for it. thx

[Racer8 0]

Is your Modo a blade or a OPS? If it is a OPS then personally I wouldn't mess with it until you break the blade and convert it into a Synthesis shaft and put in an Iggy.

If its a blade then I've seen two methods that work with varying degree of success. Do keep in mind the details. The Iggy and Modano aren't really that different so you require a rather precise method of curving. I've heated carbon blades up with a heat gun and curved them. I've never actually played with one of my Frankenstien monsters because I use blades with broken hosels to experiment on. (I have played with composite blades that I have tried to change the lie on.) However, I don't think it is good for the blade either. Carbon blades seem to have an enamel around them and heating it up seems to make the blade weak. To make a mid curve usually I just step lightly on the middle of the blade. A pro-curver would help.

A friend of mine uses Easton Ultra light Graphite blades in a Shanny curve. He likes a long, flat blade so he boils them in water for about 5-10 min, lays in on the floor and steps on it. Result: A large, lie 6 heel curve. Works. Doesn't seem to effect durability (much?), but it is a gross adjustment.

Honestly, I love tinkering with things, but more often than not I fail my way to success. Only try curving if you have a back-up stick that you're will to use as a primary.

[kovalchuk71 212]

when u curve it how do u get it to stay the way u want without having a pro curver?