tuck LS2P blade

[coop9 0]

i have a pair of NB one 90s and the tuck LS2P blade is loose. ive tightend the blade but the front of the blade is still loose where it hooks into the plastic. is there anything i can do to fix this problem. thanks :)

[JR Boucicaut 3804]

Take out the blade, put some silicone inside the holder where the front fin hooks up, reinsert and let cure for 24 hrs.

[coop9 0]

ok great thanks :)

[skatedoctor 0]

Good idea, but what if you snap a blade, the sillicone will be hard to remove from inside and the new blade may not fit in correctly?

Just a thought?

[Guest cool_aid]

just get a new pair??

[coop9 0]

i thought of that but its still useable so..... its just anoying

[JR Boucicaut 3804]

Good idea, but what if you snap a blade, the sillicone will be hard to remove from inside and the new blade may not fit in correctly?

Just a thought?

My NBH rep gave me a tube of silicone to fix the problem. That is what they are telling dealers to do.

[skatedoctor 0]

Good idea, but what if you snap a blade, the sillicone will be hard to remove from inside and the new blade may not fit in correctly?

Just a thought?

My NBH rep gave me a tube of silicone to fix the problem. That is what they are telling dealers to do.

Thats fair enough!

Good way to fix them! Any sort of silicone? As there is loads out there!

[Jason 65]

My LS2P's have the same issue. Is NBH fixing this problem on newly manufactured holders or are they gonna give silicone to all new owners? If I wanted to buy a new pair of LS2P's are they likely to have this same problem?

[JR Boucicaut 3804]

It doesn't happen to all of the skates, but to those that do, that is the fix.

I've never had to use it. I can't tell you what it is, because the tube is Chinese.

[Jason 65]

What about newly manufactured holders though? Is NBH stepping up their quality control on these?