CCM/RBK prostock sakic clone

[smitty 0]

anyone know what the pattern numbers are for sakic clone in either ccm or rbk? i beleive the drury is D16 but not sure on the sakic. thanks.

[Louie 28]

SK11 I believe

[D-MaN88 0]

Yes, Louie is correct, the SK-11 is the Sakic clone.

[Stampede#11 0]

Don't know if the European 11 is different to the prostock range, but the 11 over here is the Doan clone (hey that rhymes). I have been playing with it on and off for about 6 months.

In the rest of the Euro range the 19 is the forsberg clone and the 5 is Lidstrom .... don't know if those numbers for the North American prostock range are the same?

[bekster 0]

Don't know if the European 11 is different to the prostock range, but the 11 over here is the Doan clone (hey that rhymes). I have been playing with it on and off for about 6 months.

In the rest of the Euro range the 19 is the forsberg clone and the 5 is Lidstrom .... don't know if those numbers for the North American prostock range are the same?

Its a little off topic but:

If the MSH pattern DB is correct the Doan is a 5 lie heel curve, the euro 11 is a mid-heel and the lie is like 5.75!

And the euro 19 is not a forsberg/modano clone at all! Its a deep mid, slight open and same lie as euro 11. Maybe you mixed the 11 and the 19 up? I'd say the euro 19 is closer to a sakic and the euro 11 is closer to a forsberg (but the lie is off)

Thanks to MSH i learnd aboud the lie of a blade wich most europeans (LHS included!) dont know/care about! Using the correct lie made a big difference in my game, but its hard to find 5 lie (or lower) blades since the modano (or pm9) is quite unpopular over here.

[Stampede#11 0]

Not mixed up ... I have several 11's and they are closer to the Doan by most accounts. I would say a half inch mid/heel with a 5.25 lie (as they are lower than Sakic's I have but not as low as Warrior Weight). I have just been stood in a LHS and the blades with 19 pattern on them were closest to Forsberg Easton pattern.

The CCM blades I have are all the ones made in Finland, I have the Vector 6, 7 and 8 blades. All in the 11 pattern which is the above curve described.

[bekster 0]

Not mixed up ... I have several 11's and they are closer to the Doan by most accounts. I would say a half inch mid/heel with a 5.25 lie (as they are lower than Sakic's I have but not as low as Warrior Weight). I have just been stood in a LHS and the blades with 19 pattern on them were closest to Forsberg Easton pattern.

The CCM blades I have are all the ones made in Finland, I have the Vector 6, 7 and 8 blades. All in the 11 pattern which is the above curve described.

Ah ok you're right, the finland made blades are quite different, i actually was about to say the finland p11 3K blade has almost a 5 lie.

But the 5K and higher end blades in my lhs are all made in china. You've got finland made v8 blades?? Are you from finland? The guy in my lhs told me everything but the lower end stuff (3k/v6,v7) is made in china?!

did you compare the 19 to an easton forsberg wood blade? I foud the wood ones to be more like a 5.5 lie and more of a mid curve.

[Patrick67 1]

I have some v10.0 Taper blades in the basement, they are made in Finland.

[Stampede#11 0]

I'm in the UK. The 19 curves were last seasons V8 (Dark Orange colour), and held them next an Easton ST blade. The V8 I have is Black with new CCm logo on them.

[colt45 0]

SK-11 is the official one...you can find them on Ebay (usually the RBK 6k OPS blue and white)

[HkY_GuY 2]

my rbk sickick it a SK-11 and it definitly a sakic clone.

[Steve123 0]

On the 9k O-Stick it is called the D11.