stripped screws

[loudizzzle 0]

I have a few stripped screws on my 8k w/ oakley visor, does anyone have any good ways of trying to get the screws out with our ruining the visor?

[Stacey 0]

If you are referring to the threads then grab a pair of needle nose pliers to keeo a hold of the female backing from turning and turn the screw out. If it's not the threads but the screw head then get a dremel or a hacksaw and cut a straight line on the screw head so a flat head can fit and twist it out.

[lampliter87 8]

The screws in my 8k did nothing but spin, as said above use needlenose pliers to hold the female part in place while you use a screwdriver. May take a little elbow grease.

[jrhky36 1]

i would recommend needle nose vise grips. won't slip off the female (nut) and damage anything.