One80-One75-One90

[danc 4]

Since the One80 replaces the One75(one90) does it fit more like the old One90 or the new One100. Hope that makes sense. I bought my son 100's which he says feel great and found One75 on clearance from hockey monkey. I'm thinking these would be a good back up pair for outdoor rinks etc. Any thoughts as to how the fit will compare.

Thanks

[VooDewd 0]

Definately makes sense, I'm wondering the same thing. Let me know if you found the answer, either way I'm heading to LHS this week to try the One80's and One100's.

[Aussie Joe 0]

I'm not sure about the One80, but I know the One90 and One75 fit different to each other, all be it, slightly different. My One90's are a tad shorter in boot height. Which gives you a diff type of feel when you do a tight angle turn or stop/start. It's not a bad thing, just different. If Bauer did the same between the One75 and One80, it wouldn't surprise me.

[the_sock 1]

The original ONE90s had a few problems, a narrow heel and very shallow volume. The next generation of ONEXX skates (ONE35, ONE55, ONE75 and ONE95) solved the problem of the original and the third generation, the new ONE60, ONE70, ONE80 and ONE100, fits the same as the second generation. In fact, they're alsmost exact same skates but with updated cosmetics.

The new TOTALONE skate fit differently than the second and third generation ONEXX skates. Confused? So are most people.

[Aussie Joe 0]

The original ONE90s had a few problems, a narrow heel and very shallow volume. The next generation of ONEXX skates (ONE35, ONE55, ONE75 and ONE95) solved the problem of the original and the third generation, the new ONE60, ONE70, ONE80 and ONE100, fits the same as the second generation. In fact, they're alsmost exact same skates but with updated cosmetics.

The new TOTALONE skate fit differently than the second and third generation ONEXX skates. Confused? So are most people.

I loved the ONE90 fit, still playing roller hockey on those boots.

I'm glad you mentioned that the new Supreme line is prettier then the previous Sock.

[shifter 0]

The original ONE90s had a few problems, a narrow heel and very shallow volume. The next generation of ONEXX skates (ONE35, ONE55, ONE75 and ONE95) solved the problem of the original and the third generation, the new ONE60, ONE70, ONE80 and ONE100, fits the same as the second generation. In fact, they're alsmost exact same skates but with updated cosmetics.

The new TOTALONE skate fit differently than the second and third generation ONEXX skates. Confused? So are most people.

Totalones fit different translates into a wider fit because of the liner being thinner then the one100 ( which is the one95 with a thick white tongue)

[Andoy 5]

Quick question. My brother is using my old one90 skates but has to replace the holder because the lightspeed power holder is cracked. I'm planning on using lightspeed 2 holders (254mm) from another pair of similar sized skates (Vapor Shift). One90s are 6.5D would size 254 holders be ok for them?

[saber26 0]

in my experience i feel that the one75 and one 80's fits are almost identical. idk about the one100 to one80 fit but id assume that they are similar since they are both supreme line. it would probably be a safe bet to say they are close to the same fit if not the same