Profile Settings on Cag One with Bauer LS2 Help

[tooomey 1]

First off... Im am skating on size 6.5 Bauer One100 with Tuuk Lightspeed 2 with LS2 blades. My profile was done on the Cag One and was set at 25-45.

Im looking to get a little tighter turning out of my skates. I says on the Cag sheet that the 25-45 is a neutral setting on a size 6 but not sure what that means for a 6.5?

Can anyone tell me the pitch of Tuuk holder?

What foot radius is the 45 on the Cag?

Any recomendations for me to get tighter turns?

Thanks

[jimmy 194]

If you want tighter turning, you need to reduce the flat spot, so try a 30/40 if you want some lean or 20/40 is you want neutral. On a 6.5, you can even go down to a 35mm flat.

[jimmy 194]

Rubo, but you can cut any CAG radius in half or in any way you want, you just have to know how to do it. There is absolutely nothing wrong with CAG radius and MANY pro's use them as well. If one knows what they are doing, a CAG radius can offer many improvements over a stock generic radius.