Oakley Visor Mounting Hardware

[kovalchuk71 212]

Can this be purchased separately? Long story short, I switched back to a cage a while ago and misplaced the majority of the original hardware. Any help?

[trailboss241 1]

You don't need to use what Oakley sells you. I'm pretty sure you can find some plastic washers that will do the trick at a Lowe's or something. Check your Lhs also

[notquitedeadyet 13]

The screws are 10-32 & most hardware stores have them with the larger heads just like the originals. The length depends on the spacers you decide on. If you have wire stripping/crimping pliers, they are able to cut the screws to length without boogering up the threads.

I once figured out that the screws were the same size & head configuration as the ones that hold the knobs on the kitchen cabinets. Wife wasn't happy.

They also should have nylon spacers, or washers you can stack up, but I prefer using faucet washers because they aren't as slippery & don't have to be so tight to keep the visor from moving around.

[EvilPepe 24]

Great suggestions above (especially the faucet washers), but just for reference - yes, you can buy them separately, it just may be tough to find someone with them.