YesLanges
-
Content Count
334 -
Joined
-
Last visited
-
Days Won
7 -
Feedback
0%
Posts posted by YesLanges
-
-
23 minutes ago, Santos L Halper said:I asked my buddy about that and he said that the Marsblade people told him that whatever profile a skater is currently using likely won't work when s/he moves to the Marsblade holder, so they took what he has on his standard holders and adapted that for the Marsblades.
Hopefully, they're just wrong about that. Any chance he'd redo the test after letting you do his normal profile on them?
-
1
-
-
That doesn't sound too good, but thanks for the update. Maybe I'm lucky they don't seem to have a record of the 2nd set I ordered. Any idea when they're going to be shipping these? The latest update over the summer said end of October.
Did you profile his steels to match his regular profile before he tested them? Only asking because his comments would probably be similar if he switched from his custom profile to a stock profile. Nothing you don't know better than I do...just asking.
-
9 hours ago, boo10 said:I run a strip along the bottom, arround the toe and along the top. Then tape all the way past the toe and cut off the excess.
Ditto. It helps tremendously by protecting the toe when you dig pucks off the boards and it extends the life of the tape job with that layer running under the bottom edge of the whole blade. Obviously, it's not going to add any protection from snapping, but it will definitely keep the blade from chipping and wearing down at the toe's front edge. I started doing that after destroying the edge of the toe on a brand new stick in 1 game and after I saw how some of the used pro-stock sticks I bought had apparently been taped by professional trainers.
-
5 hours ago, the_game said:His specific study focused on female soccer players I think, but he's a hockey guy so I tried to get his take on it. I believe he had a few things published or was involved with a few things that got published, will have to ask him.
That definitely makes him someone whose intuitive thoughts about it are valuable; but he'll also know that it's very tough to draw any conclusions derived from females to males on this particular topic because of the known greater vulnerability to ACL injuries in females relating to what I believe they refer to as the "Q angle" associated with wider hips. That's something that's been well-established in the literature. My guess is that the amount of blade on the ice (or wheel surfaces on the floor), knee bend, and the amount of time that a stride leaves the blade or wheels in contact with the skating surface will be the most important variables, with pitch only contributing indirectly as a function of one or more of those variables.
-
6 hours ago, the_game said:there's no right or wrong answer
Your buddy probably meant that there's no right or wrong answer only as a general principle, where pitch is an isolated variable (i.e. without knowing or considering anything else about the skater in question). I'd expect that he'd agree that, in terms of pitch, the safest angle for ACL and other knee issues would probably be whatever angle represents the most natural preference of an experienced skater and that changing that angle now would be less safe for that skater. A skater whose natural pitch is forward and who's been skating that way for years would probably be more likely to injure his ACL by changing that angle, especially during the time that he's first adapting to it. If anything, I'd imagine he'd say that it might be the flat-footed, stand-up skater who'd want to consider pitching more forward to protect his knees rather than the other way around.
-
I don't skate on wheels, but I have an ACL repair and I think anything that increases knee bend is safer for your ACL than anything that reduces knee bend. The only time I've ever felt a twinge on the ice and felt the need to get my skate off the ice to protect my knee is where my legs weren't bent much and someone either leaned on me in the slot or otherwise forced me to shift my weight on fairly straight legs with weight on that leg when I wasn't expecting or planning to shift my weight. Other than that, as mentioned, anything that increases the amount of time your foot is planted with weight on it increases the risk of an ACL injury, although more indirectly, (such as where you have to react or where someone forces you to shift your weight) versus directly (such as from the normal forces generated by your natural stride). I use a very aggressive forward pitch and I believe that the risk to your ACL increases with the amount of time you spend leaning less forward, especially if your stride is more naturally forward.
-
Tough to beat a wife willing to stand by the glass all game, but compare her reaction to goals in 2014 and 2018.
2014 (7 Red): https://www.dropbox.com/home/Good Ol Boys games/Boys vs. BS%26B 2-9-15?preview=Chas+Blue+Moon+from+Dave+%26+Steve.mp4
2018 (21 Green): https://www.dropbox.com/home/Mallards vs. Aces 5-30-18?preview=video-2018-05-30-21-21-38.mp4
-
Don't toss your shit, because you never know when you might change your mind; just put in storage or whatever. You really never know when the itch might hit you again. I'm 57 and sorry I didn't play at all between 28 and 53; I never really stopped intentionally: I just skipped a season, which became 2 seasons...and then 25 seasons. Started thinking about it in 2013 because there was a new rink that opened up right near me (since closed for good) and the wife and I started talking about hockey during the Winter Olympics that year. You may just decide to skate for the workout someday or get on the ice with your kids if you end up having any and you're going to hate having to get all new shit because you tossed yours out.
Right now, I'm sidelined with a badly herniated L-2/L-3 disk and my main concern about it is just getting the F back on the ice; I'm just hoping this doesn't cost me more than one 6-month season. It happened 7 weeks ago and I'm hoping to be able to start skating on my own again after 3-6 months and then be ready to play again by next April or May. Had to withdraw from my team and miss the whole second half of the season that just ended. The 50+ league I've played in for the last 4 years is mostly the same 90 or 100 guys split up into 6 different teams every 6 months. It's very cool to know and play with and against the same core group of guys every season for years, even if you don't really hang out with any of them outside of seeing everybody at games and sticks & pucks when any of them has the time to practice during the week. I tend to be very outgoing within any group I'm already organically a part of but practically a loner-hermit otherwise and totally self-sufficient and content never to go out of my way to socialize at all (unless you count strippers). Social connection was the last thing on my mind when I started playing again, but I have to admit that I do miss that aspect of it, now that I'm out.
-
1
-
-
2 hours ago, Vet88 said:And having been through this, I partially disagree with YesLanges as to muscle strength. It's not that you will develop new muscles but you will use the ones you have differently and this will lead to a lot of tiredness and sore muscles for a while as they build strength / condition. Calves and the outside shin muscles and quads have to work extra hard.
We're not really disagreeing. Anytime you change something about your skates (or do anything athletically that's new to you, more generally), the muscles involved will work differently and in ways that are new to them and they'll get sore in places reflecting those differences until they adapt. As they become used to it, the soreness goes away. It's not that they don't also become stronger in the process; but the critical difference between being able to balance on an edge without support and not being able to isn't really a matter of the strength of those muscles, per se. If it were, in principle, you'd also be able to improve your skating without laces by exercising those same muscles on a weight machine designed to provide resistance in every plane of ankle movement. That's not the case, and all the targeted ankle-strength resistance training in the world wouldn't enable you drop eyelets and skate as well as lacing them up, because what you're really doing with this kind of thing is training your brain and your brain-muscle connection, rather than strengthening muscles, exactly as you describe right here:
2 hours ago, Vet88 said:Your brain very quickly works out that efficient skating and muscle use is when you are on top of your blade.
This is all I'm saying: the critical component here is neurological learning rather than increased muscular strength of the muscles involved.
-
4
-
-
Take it from someone who comes from as far from that as anybody could ever get, that the less ankle support you can practice with the better it will be for your skating. The sooner in your development you do it, the better, because your skating won't have to get worse first without the support before you see benefits. For someone my age who relied on a lot of lateral ankle support from day one, it would probably not be possible to relearn to skate without support and ever expect to skate much better than someone who first learns to skate in his 50's. I'm amazed at your description, because if I took out my laces, I would LITERALLY not be able to walk across the dressing room, let alone get on the ice to try "careful stops" NFW.
It's not that you can skate better without laces; it's that if you learn to skate without a lot of lateral support, you can get onto and get more out of your edges in every respect. You can also flex both your knees and your ankles more, and probably open your hips more, too. But you don't go right to lace-free skating; and that's not the way you should try to incorporate the idea into your training. What you want to do is reduce the lateral support gradually and only after you're already able to skate as well as possible (for you) at your current support level, or if you haven't started yet, at the first support level that you drop down to from whatever you're most comfortable with now. Lace-free would be the final level but most of the benefit is already reached by the time you're skating comfortably and playing with the top one or two eyelets not laced up. There's a guy who played for the Kings in the 80s (Daryl Evans) who coaches and plays in AHL Alumni games with his tongues flopping forward and curling over his toe caps. We get it, Daryl: you can skate without laces; you can tuck your tongues into your skates and loosely tie a few eyelets and also avoid a stupid injury from catching a pass on the bare foot. Just tie a little looser and/or skip an eyelet at the top and try to increase the loosening once your comfortable at the previous step.
Some of us have had this discussion in many different contexts, but it's not really "ankle strength" that's at issue. The Muscles are involved but it's really the neuromuscular connection between brain and muscles that provide critical balance at different levels. When your nervous system has to fire the small muscles near your ankle regularly, it lays down neural pathways that become thicker and stronger, involving more nerves in a larger network communicating signals to and from your brain to balance you. That's the main change that occurs in body tissue, not the muscles in your legs and feet, What's usually referred to as "strong ankles" in connection with skating are more accurately described as well-coordinated ankles. Try loosening up a bit for part of practice sessions until you feel comfortable enough that way to play a game; then continue repeating that process by going progressively looser as you get more and more comfortable with less lateral support.
I'm not a bad skater with my taped-locked ankles; but I'd be a much better skater today if I'd hung in there without taping up at 14 as a shortcut to faster improvement than I was making at that time without tape, taking my time to build up to skating well with less support. No. 10 in Maroon.
https://www.dropbox.com/home/red vs white 10-23-16?preview=20161023_210649.mp4
-
1
-
-
Scott Marwin is the guy I'd have do it; he uses a direct lateral approach. But I'm still hoping to go as long as possible without it. Played well tonight and feel pretty good so far; will have a better idea sleeping tonight and seeing how it feels tomorrow. I'm amazed that you were skating again in August. One of my teammates also started skating again only 2 or 3 months after his resurfacing and he was playing again in 6 months. I know that's not me, though: slow healer and I'd need to be back in whole-body shape first, not just skating. I feel like I'll be lucky to be playing again after a full year.
-
I'm also a candidate for THR, but I've been trying to postpone it as long as possible by limiting my skating time, always using the door instead of hopping over the boards, and doing my hip exercises on my gym leg days. It hadn't been bothering me for the last 2 years until a couple of weeks ago because I gradually started skating too much again, between my own games, subbing for other teams in my league, and sticks & pucks once or twice a week. Skipped my last 2 games to rest the last 8 days hoping it would calm down again. Got a game tonight. If it's still an issue, going to rest 2 full weeks this time and hope it goes back to where it was until it flared up again.
If I do it, it's going to be Birmingham resurfacing instead of THR; but I'm scared shitless about any major surgery where they paralyze you, because of the nightmare scenario of anesthesia failure with no way to communicate that you're awake and feeling everything. (It's rare, but if you're one of the thousands of people to whom it happens annually,* the fact that it's "rare" isn't much help while you're the one enduring something as bad as any Medieval torture for 2 hours.) I'm also pretty sure that it will be at least a full year before I'd be playing again and I dread having to start all over (again), so just trying my best to appreciate and enjoy playing as much as possible right now.
*[Just trust me on this so I don't have to dig up links to the the peer-reviewed JAMA and NEJM studies. It does happen, and much more often than anybody considering surgery would like to believe.]
-
3 hours ago, smcgreg said:I classify most of the new high end boots from Bauer, CCM etc (not Graf) as Skiboot boots.
Gotchya. I didn't notice any difference between the feel of the Bauer NXGs and the Grafs, myself. I was amazed at how much better the lateral support was compared to the old Supremes and Tacks, but I just couldn't find a happy medium in those new boots that allowed me enough lateral support without limiting my forward ankle flex. If I tied them tightly enough for lateral support, I couldn't bend my knees; and if I left them looser, I didn't have enough lateral support to stop and cross under confidently.
-
22 minutes ago, smcgreg said:Anyway, I was first struck by the fact you had a dozen pair of Langes, because I would have assumed they would feel like new Skiboot skates (as confirmed by Jeremy in the video) and as an old timer who left and came back on the same timeline as you, I can't stand new skates. They just don't fit as well as older skates and as also stated in the video, a properly fitting skate is probably the most important factor in on-ice performance.
I'm not familiar with Skiboot skates at all or with what part of Jeremy's video you're referring to; but the one tremendous advantage to Langes is that there's literally zero break-in time. I can put my holders onto any "new" (meaning newly-purchased) boots and play in them immediately. Within the same model, the liners are interchangeable and can just be swapped out with others if they wear out or if they're still not dry from the last time I used them. I've collected even more liners for these than boots.
I've noticed that there definitely was an issue of quality control in that the ankle-hinge placement is much better on some pairs than on others. You can see that from the amount of space between those four molded lines running down the uppers and along the lower boot: on some of them, the gap is much bigger than on others and it has to do with where the rivet holes were originally drilled. That does make some of them better for me than others; but comfort-wise, even a brand new pair of these skates feels exactly the same as whatever pair you've been using. The new ones are actually more comfortable, because the liners haven't been compressed for hundreds of hours of skating and are a little thicker. More often than not, the ones I've found on eBay weren't used for serious hockey, judging by their overall condition and by the amount of steel left on the original blades: they were probably just used for recreational skating or occasional pickup hockey. You can tell which ones were probably used for organized hockey because they show all the yellow and white paint marks from the boards and because the tongues are pretty beaten up from lace bite.
-
Just got notified that delivery has been postponed from July to sometime in October. Not thrilled about that at all.
-
As long as the boot is long enough to take them, there should be no issue. You'll need new holes, but I think there's a strong argument that the longer the steel the better, as long as the holders aren't longer than the boots.
-
On 5/23/2018 at 2:27 AM, the iceman said:Pro wrap and hockey tape
This works best, but either have a trainer show you how to do it right or read up on it first. If you do it wrong (such as by covering the joint line or taping a straight wrist tightly), you can cause a serious injury falling on it or jamming it.
-
1
-
-
Would it be simpler to just have the old holders swapped onto the new boots? Instant solution, no experimentation necessary, and probably comparable in price if you end up having to change the profile a few times to get it right. I think there might also be an advantage to having the longest steel possible for any given boot that will accept it.
-
1
-
-
1 minute ago, Dangles83 said:@YesLangesit was my post in the shin reviews for jetspeeds; I was shocked at the lack of protection!
You're too fast: I just found the thread and came back to edit it.
-
21 hours ago, Jason said:I got hurt a couple times and decided to get the most protective shins I could find at the retail level.
I'm amazed by this and even more so by the photo posted recently by [Edit] Dangles in the Jetspeed thread [Edit]: he got a huge welt from blocking a shot that caught his pad flush right on the middle of his shin, which should be the easiest part of the leg to fully protect. I can't believe this still happens at all when they've been testing and developing these things for more than 50 years and selling new models with "innovations" and "improvements" in protection almost every season during that time. These things can be stress tested to measure how much force it takes to break the plastic or deform it enough under a load for the shin to be injured by a puck moving at whatever velocity they choose to test. We're not even talking about secondary areas like calves or articulating areas (like right under the bottom of the knee cap on some designs) that can't provide complete coverage under rigid plastic.
I don't know whether that's a deficiency in only one manufacturer or when it is that pad technology peaked in some equipment lines, but something's wrong when some 10 or 15-year-old pads that weren't even top-of-the-line retail stuff when they were sold are more protective than some of the newest stuff out there. (I feel the same way about some modern gloves whose segmented fingers expose you to injuries like Marc Methot's, courtesy of Crosby last year; but at least that's strictly a function-vs-protection design-trade-off issue and not a materials issue.) My Jofa 5500s have blocked a few rockets that I never felt at all; and they're described as "entry-level," which means anything up from that level made 10+ years later should be at least that protective.
-
23 hours ago, StacktActor said:It seems the majority so far believe it will be a niche market, which is probably the most probable conservative assumption.
IMO, they're either going to explode if they make a very noticeable difference in skating or die out just like other failed technological "revolutions" if the don't work or if any difference in only marginal. I was already out of the game before composite sticks completely (or nearly completely with the exception of some old-timers) replaced wood sticks, so I didn't witness how long that transition took to filter down and become universal; but that seems like a comparable example. If composite sticks only made a slight difference, there wouldn't have been much of a market for them beyond the most elite levels where players don't pay for anything and where even the slightest advantage is worth paying around 5x to 10x more for each stick. The last time I played before coming back 4 years ago, there were only a few guys on my team even using composite shafts and replaceable wooden blades. How many wooden sticks (or blades) do you see nowadays, even in recreational leagues and pickup? If these things work as advertised, they're a lot cheaper compared with what everybody's skating on now than composite sticks are vs. wood sticks. Of course, if they work but don't hold up under playing conditions, then, they'll probably be used primarily at the elite levels (assuming they're approved for use) where neither cost nor inconvenience is an issue, exactly as suggested by Santos and others.
-
2
-
-
Thanks...might as well ask her to weigh in, too.
-
On 5/14/2018 at 4:12 AM, Vet88 said:The current consensus is that although liquid water at the ice surface does reduce sliding friction on ice, this liquid water is not melted by pressure but by frictional heat produced during sliding.
The link doesn't open for me, but that part really seems counter-intuitive. First, wood and rubber floors (etc.) obviously have a much higher coefficient of friction against steel than ice, but I can't imaging that sliding a skate blade under pressure for a foot or two even on wood or rubber would produce enough heat to melt ice. Second, if it's friction, then you'd also expect that the surface of the blade would be a little warm to the touch after a long glide on the ice, which I highly doubt. Third, there's definitely much more friction between blade and ice sliding sideways while stopping than there is when a blade slides along the ice smoothly in a forward direction. So, if it's the friction of the blade against the ice, why wouldn't stopping on ice produce a slippery puddle in addition to shaving ice?
-
22 hours ago, flip12 said:Do his Langes have an extra eyelet at the top compared to yours or just another one at the bottom of the hinged upper at eyelet-3?
He tested the model they called "Laser 3" like the pair on the far left of my first photo. They were a later (slightly cheaper) model to the original "Comp" (probably short for "competition") that all the pros wore until the "Laser 5" came out around '77. The Laser 3 had a thinner, less-protective felt tongue covered by a top layer of synthetic "leather" and the Comps had a thick protective tongue with some semi-rigid material inside. You can see the cheap tongue on Jeremy's model. I wore those tongues-out as in my avatar; the other tongue really can't be flopped over.
The original Comp and the entry-level Laser 2 both had 2 eyelets on the upper boot; the Laser 3 and Laser 5 both had 3 eyelets. It's the Laser 5 that you see in most of the old photos of Esposito, Duguay, Greschner, and McTavish (the last helmetless NHL'r) with the Lange symbol on the outside of the boot near the toe-cap and the brand name going up the ankle instead of along the lower boot. The Laser 2 was shaped more like the other Lasers but only had 2 eyelets. My Laser 3s don't have the original tongue because I cut the tongues out of another pair of Comps to make an upgraded liner for them. All of them had removable liners but the tongues were attached to the boot in the original Comp; all of the Lasers had tongues attached to the liners. One reason I've bought more skates than I need is that I've cut the tongues out of Comps and used them to create a half a dozen upgraded liners that all now have attached Comp tongues. Hey, think it's too late to start a review thread on these?
[Edit: I'm not 100% sure the other 2-eyelet model was actually the Laser 2; that's just my assumption about the earlier-looking Laser model with 2 upper eyelets instead of 3. I picked up a pair of those but there's was nothing indicating the model and I tossed them after harvesting the liners. They could be Laser 1, which I've never heard of but could have existed, in which case, I don't know what the Laser 2 was. There was also at least one other later model that seemed lower-end than Laser 5 but had a more modern leatherish liner. I bought and then resold a pair of those on eBay, too.]
-
3
-
Drills to improve balance during pregame warm up
in General Hockey Discussions
Posted · Report reply
Unfortunately, it's not atypical at all, because a perfect match between left and right on retail skates is probably more the exception than the rule. At least when they're both straight relative to the longitudinal axis of each boot, your body usually adapts to a slight mismatch in the distance to the boot edges the same way it does when you make other slight changes that don't necessarily affect one foot or the other individually. When they're not even even straight relative to the longitudinal axis of the boot they're on, I think that's much more of a problem that requires a fix, especially if you notice that it makes a difference and causes you issues on one skate that you don't have on the other. In that case, you might be lucky that they're also mismatched relative to the edges of the boot because that leaves the shop a little more room to work with if you have one holder moved to match the other. If they're already perfectly matched in the distances to the edges of the boot except for one being crooked, it's a lot harder to shift it over because there isn't enough room for brand new holes in the bottom of the boot that aren't so close to the original holes that they create larger misshaped holes when they drill new ones. There probably is a way to fix it that one of the skate-repair experts will explain, but it's probably a lot of work.