Re-gluing a blade

[fedorov#91 0]

lol thanks but im still confused what do i do with the stick tape

[Fedorov91 0]

Yup, just look at those pics. Take a small piece of tape (doesnt matter what color) and put it along the hosel of the blade (the goes in the shaft) heat it up and put the blade in, works even better than glue.

[Fedorov91 0]

By the way... you stole my name

lol just kidding

[fedorov#91 0]

Thanks alot yall (oo yeh my slang) lol mine has a hashy thing

[J-Shera 0]

http://img18.echo.cx/img18/3426/untitled992no.jpg

http://img18.echo.cx/img18/3496/untitled898iz.jpg

[hitz14 0]

ya thats it but i usually put the strip on the other ends of the hosel

[Michael9 57]

i usually put it on both

[fedorov#91 0]

Thanks got some glue today blade in shaft and viola! but im try the tape on my other shaft

[Cheechoo 0]

I use a hair-dryer but like how are you suppose to pick the glue up and put it on the blade

I know a few people answered your question as to how to put the glue onto the blade, but there is a much easier way: DON'T put the glue onto the blade hosel. Just heat the top of the glue stick and scrape the melted glue off onto the inside of the shaft (all four sides). Then, when you push the blade back into the shaft you get a nice even spread of glue along the length of the hosel. Much easier than trying to make the glue stick to the hosel before inserting it.

[ktang 34]

I use a hair-dryer but like how are you suppose to pick the glue up and put it on the blade

I know a few people answered your question as to how to put the glue onto the blade, but there is a much easier way: DON'T put the glue onto the blade hosel. Just heat the top of the glue stick and scrape the melted glue off onto the inside of the shaft (all four sides). Then, when you push the blade back into the shaft you get a nice even spread of glue along the length of the hosel. Much easier than trying to make the glue stick to the hosel before inserting it.

I tried that, but I ended up with glue only in the deepest part of the hosel because the glue was pushed into the shaft. Then I could feel the blade wiggling in the shaft.