x-1 Blade

[kovalchuk71 212]

If anyone can find one in a RH Sr. Messier PLEASE post here or let me know. I have been searching all night with no luck

[thejackal 46]

It's pre-preg, and has the same pros and cons as the xn10/r+ blade.

[kovalchuk71 212]

Both? I know PTC is but the x-1 is too? So, they are basically the exact same blade, with the exception of the "focus flex" thing of the ptc correct?

[kovalchuk71 212]

Also, are Comp blades ever off with their lies?

[thejackal 46]

Not all X1s are pre-preg. The early ones are RTM.

[kovalchuk71 212]

What does that mean? Ive always wondered

[ambro 0]

Old/original responses were RTM. The newer TPS stuff (Xn10, Adrenaline) is pre-preg and I think you know the difference between them.

RTM = Resin Transfer Molded.

[BIG 0]

how can you tell the difference...

[thejackal 46]

The finish is different, and pre-preg is stiffer.

[kovalchuk71 212]

edited topic

[BIG 0]

If anyone can find one in a RH Sr. Messier PLEASE post here or let me know. I have been searching all night with no luck

http://hockeyoutlets.com/tpsx1sehobl.html ;)

[Fonya 0]

how can you tell the difference...

What the guy below you said and the RTM ones on the old responses were kinda hazy while the newer pre preg blades are glossy.

[kovalchuk71 212]

If I order from NC and hockeyoutlets is in CA, it says it takes 5 days. Will I get it by Fri.? Im asking because Im not sure if that includes the shipping date?

[kovalchuk71 212]

All out :(

[kovalchuk71 212]

Hows the TPS intrigue blade? What makes it cheaper than the other TPS blades? Is the feel any different?

[thejackal 46]

It's a bit like the Vector blades. Good for roller I suppose, but not as stiff as regular comp blades.