Lightspeed holders on tacks 852

[swede 52]

I'm going to put Tuuk lightspeed's on my CCM's 852 8,5 D. The sizing chart on hockeymonkey.com says the 272mm is the size to go for, but my Prolite 3's are 280mm.. What would fit?

another thing.. Is it neccesary to drill new holes in the sole or will the old ones fit?

[JR Boucicaut 3810]

Whatever is on the boot. If the holder says 280, then you need 280 for the LS.

New holes will be necessary.

[Remman 0]

I went with what was on hockeygiant. I have lightspeed's on my 452's, and when I took them in the guy said that CCM put the wrong size holder and runnders on in the factory. He said they have been known to do that and has seen it numerous times. I have 288 on a size 10. CCM originally put on 295, and they even looked too big.

[Ivan 1]

I went with what was on hockeygiant. I have lightspeed's on my 452's, and when I took them in the guy said that CCM put the wrong size holder and runnders on in the factory. He said they have been known to do that and has seen it numerous times. I have 288 on a size 10. CCM originally put on 295, and they even looked too big.

Sounds like yours was an exceptinal case. Normally you really want to go with same size replacmnt runners that your skates have.