Creating A two piece from a former one piece...

[beaver5 1]

ok i know its been discussed before but lets make a list of ops we know are fused shaft and blades, and can be taken apart to have a seperate shaft and blade... ive done a few myself so ill start it off, and check off the ones other members know as well. feel free to add more sticks to the list too :)

warrior dolomite: CHECK Shaft and Blade

Warrior starskie: Check shaft and blade

Warrior Macdaddy: ? One piece shaft

Warrior Kronik: ? One piece shaft

Easton SL: ? shaft and blade

Easton ST: check shaft and blade

Easton SE: ? shaft and blade

Easton Stealth: ? one piece shaft

Bauer Vapor XXX lite: ? One piece shaft

Bauer Vapor XXX: ? One piece shaft

Bauer Vapor XX: check shaft and blade

Nike Bauer One90: ? shaft and blade

RBK Sickick: CHECK Shaft and Blade

RBK 6k: ? Shaft and blade

RBK 5k: check shaft and blade

RBK 4k: ? Shafts and blade

CCM v130: ?

CCM vector 10.0: ?

Mission Pulse: check shaft and blade

Mission V-Hex: ? shaft and blade

Mission Fuel: ? shaft and blade

Tps Response Lite: ? shaft and blade

[blues_91 0]

Starskie, Vapor XX, Mission Pulse

[beaver5 1]

edited up

:) thank you

[sabres48 0]

edited up

:) thank you

5k

[willy0314 0]

took a little work, but I did it to my Easton ST. Took a little more heat then I would have liked, but the stick has held up really well.

[beaver5 1]

yeah it took forever to chisle out the dolomite but i managed to get er.

[Chadd 916]

Ok, now that it's all filled in can we close this?

[beaver5 1]

yes sir :(

[sabres48 0]

Im gonna take a wild guess and say the v130 and v10 are not fused, and are true ones.

[Chadd 916]

Im gonna take a wild guess and say the v130 and v10 are not fused, and are true ones.

Outside of the the Busch sticks none of them are true one piece sticks. The blade is still mated to the shaft after the shaft is produced.

[beaver5 1]

yeah thats what im thinkin as well..

ive got three or four v130's and 2 10.0's lying around here.

ill go hack a broken one up and see what i find

:)

[jbyun04 7]

old stick but you can do it with the old red/silver Bauer Triflex

[DEATHTRON 19]

Isnt there a thread on this somewhere?

The top end RBK/CCM are constructed like wood sticks, and with the shape of the inside of the shaft, I dont think there is any way youre going to be able to put a balde in there unless you really carve it up.

Zach

[Chadd 916]

old stick but you can do it with the old red/silver Bauer Triflex

Yes

Isnt there a thread on this somewhere?

Several of them