Can you replace blade on xn10 ops

[DINO 0]

Found xn10 ops 100 bucks same price as the shaft wanted the shaft, but why not the ops for same price but can I cut the blade off and use the shaft. If so how and what blade mfg is the best to use.

[burrn 0]

Found xn10 ops 100 bucks same price as the shaft wanted the shaft, but why not the ops for same price but can I cut the blade off and use the shaft.

if you're not going to use the OPS as it is, buy the shaft. shaft > cut OPS

If so how and what blade mfg is the best to use.

the one you always use.

[DEATHTRON 19]

You can heat the blade and pull it out. Search.

Zach

[Xi Retlah iX 0]

why would you pay the same price for more work on yourself... and like burrn said, a cut OPS isnt as good as the shaft.

[DEATHTRON 19]

Because the XN10 was money.

Zach

[DINO 0]

can you just heat the blade? I mean I might like the blade but not able to tell. Dumb question but are the tps as stiff as the warriors? Yes the xn10 is money

[SR27 0]

You just heat it like a 2-piece and it will come out easily. You might have to cut/dent out a little of the epoxy if it´s sticking to the inside walls of the shaft instead of the blade but that´s it.

[gxc999 7]

For god's sake, the blade on the XN10 is amazing. You're crazy to mess with it, man.

[Chadd 916]

For god's sake, the blade on the XN10 is amazing. You're crazy to mess with it, man.

As much as I loved the shafts, I thought the blades were lacking in feel. I may have a line on a "few" shafts though.

[DINO 0]

its the curve not the blade the sticks are hard to come by. I dont know if i will like the heel used to mid or toe. Its a young pro stock, and dont have much info.

[DINO 0]

chad where are they sellin the shafts. Let me know please do you think tps is as stiff as the warriors. I know a little redundant.

[DEATHTRON 19]

TPS really run in their own categories flex wise. Its hard to compare a TPS to the other brands because they do not make your standard 85/100 flex shafts.

I really loved the XN10's shaft, not so much the blade.

Chadd, anything in SW flex or even W flex? PM me man, I NEED them.

Zach

[Chadd 916]

chad where are they sellin the shafts. Let me know please do you think tps is as stiff as the warriors. I know a little redundant.

I never said they were available, just that I may be able to track down some more. As far as being as stiff as a Warrior, depends on what flexes you're comparing. The flex chart at the top of the page is pretty accurate, just substitute TPS for Louisville.

[kkancho 6]

I didn't want to create a new topic for this so I'll just ask here.. how's the XN10 Armor shaft compared to the R2XN10?

[Chadd 916]

I didn't want to create a new topic for this so I'll just ask here.. how's the XN10 Armor shaft compared to the R2XN10?

The early Armors had durability problems and I thought the performance wasn't as good.

[LkptTiger 1]

For god's sake, the blade on the XN10 is amazing. You're crazy to mess with it, man.

As much as I loved the shafts, I thought the blades were lacking in feel. I may have a line on a "few" shafts though.

As "sub-par" as the feel might have been, the blade had more pop to it than any others I've ever used. They were a bit "pingy," but a strip or two of duct tape (under the hockey tape, obviously) took care of that for the most part.

I fucking loved my XN10s.