Tapered Blades in T-Flex Shafts?

[bl4 39]

Hey all,

I have been having a hard time tracking down any right handed T-Flex blades and was just wondering if other tapered blades would fit in a T-Flex shaft. I realize that the shorter hosel would would affect overall stick length/performance, but I was curious if getting non T-flex tapered blades might still be an option. Thanks!

[krwwc6 0]

It will work, but as you said, you'll have a shorter stick length.

[fatwabbit 93]

Based on what I've had in the past, you'll need a 3inch plug.

[Chadd 916]

It will stiffen up the stick slightly as well since you will be losing three inches from the taper and effectively lowering the kickpoint of the shaft.

[bl4 39]

Thanks much!

[bl4 39]

One other related question: Is anyone aware of any longer tapered blade options that might mimic the T Flex dimensions? That is, do any manufacturers produce blades that fit tapered shafts (e.g. .520" instead of .620") but have the longer hosel associated with standard blades? I was thinking of contacting Custom Built/Christian, but was curious if others had ideas. Thanks!

[cemetery 14]

One other related question: Is anyone aware of any longer tapered blade options that might mimic the T Flex dimensions? That is, do any manufacturers produce blades that fit tapered shafts (e.g. .520" instead of .620") but have the longer hosel associated with standard blades? I was thinking of contacting Custom Built/Christian, but was curious if others had ideas. Thanks!

Kynetyk makes Kovalchuk pro tapered clones that for some reason have a 1" or a tad longer hosel than Warrior tapered blades.