bthompson1286

Is it better to lace skates from inside out or outside in?

does anyone know where to get the Custom Fit inserts that are now used in True Skates? I know MLX and Vh used them and now so does true. I've ordered them from true in the past but wanted to buy my own.

Sorry i meant to say that the steel I’m using is offered in both the edge holder and xs holder

Hey everyone, I’m in the process of choosing between the Edge holder and the XS holder for my skates and would really appreciate some insights from those who’ve used both. I’ve tried both holders and haven’t noticed a major difference in performance, but I’m trying to decide which one is the better fit for my long-term use. Here’s some context about my skating style and preferences: My size and playstyle: I’m a bigger player (6’2", 210 lbs) who plays a combination of aggressive, physical hockey with a focus on speed, sharp turns, and quick bursts of acceleration. I also do a fair amount of grinding the boards and tight turning. Given my size and style, I want to make sure the holder I choose gives me the best edge control, stability, and responsiveness. Key questions I have: Attack angle: I really like a more aggressive attack angle for quicker acceleration and sharper turns. From what I understand, the Edge holder has a more aggressive attack angle, which gives a quicker edge bite and more aggressive turns. However, I’ve heard that the XS holder’s more neutral attack angle might provide better stability at high speeds. Is the more aggressive attack of the Edge worth it for a bigger player, or does the XS holder’s neutrality give better overall power transfer and edge control? Stiffness: I know the XS holder is stiffer than the Edge, providing more stability and consistent edge control during aggressive skating. For someone my size, does the stiffer XS holder make a noticeable difference in terms of maintaining control when pushing hard on the edges, or does the more flexible Edge holder offer enough responsiveness and agility? I’m wondering if the flexibility of the Edge might help with agility but at the cost of a bit of stability during heavier skating. Weight/feel: Since I’m a bigger player, does the extra weight of the Edge holder hinder quick movements, or does the stability it offers help with balance and edge control? Would the lighter XS holder be better for my game, or is the weight of the Edge holder something I can work with in terms of power and durability? Durability: I’ve noticed that the Edge holder uses a plastic trigger, while the XS holder uses a metal tooth. As a larger player, I’m concerned about long-term durability. Is the plastic trigger of the Edge holder reliable enough, or does the metal tooth of the XS holder hold up better over time, especially under the added stress from my weight and aggressive skating? Quickness vs Stability: As a bigger player, stability is important, but I also want to maintain a high level of quickness and agility. Does the XS holder's stiffness compromise the responsiveness for quick pivots and tight turns, or does it actually enhance control for those moves? Does the Edge holder give enough stability for physical play while still being responsive in tight spaces, or is it too flexible for more aggressive skating? Steel compatibility: I’m using a steel that is offered in both the XS holder and the Edge holder, but I want to double-check if there’s any noticeable difference in performance between the same steel in the two holders. Is there any difference in how the steel performs in these two holders in terms of edge hold or durability? Personal preference: For those of you who’ve used both, do you find that one holder works better for players of a certain size or style? I’m particularly curious if the Edge holder is favored by players who like a more aggressive, fast-paced style, while the XS holder is better for those who focus more on power and control. If you had to recommend one for a bigger player who likes aggressive cuts and fast starts, which would you choose? If anyone has experience with both holders and can speak to how the aggressive attack angle of the Edge holdercompares with the stiffness and durability of the XS holder—especially for a bigger player like me—I’d love to hear your thoughts!

Is this true?

shouldn't a bauer 9D x:60 fit the same as a current bauer boot 9d?

what happened with your trues? I have heard the same thing. From what I read, trues are not sized correctly at all to be a custom skate

An update to this. So I tried on new skates. My X:60s fit the same as they always have. The carbon boots from bauer seem to fit a half size down than my x:60s. I'm concerned by this because of the holder size change. When I try the same size in both skates, there is a sizing difference. A 9 fit1 and a 9D has a length difference

I think what he meant was that the process of getting custom skates has been the main issue, and he's feeling frustrated. He could've probably expressed it a bit more politely.

I'm a size 9D. The APX and the 1X didn't feel as close to my foot as the x:60. I may need to try again. Also the sizing seemed different as well. I'm a 9D in X:60 but the 9D in the APX felt bigger.

Hey everyone, I’m currently on my last pair of Bauer X:60s. I was able to get 4 pairs of these skates over the years because I loved the fit and feel. I’ve tested out some carbon boot models, like the Bauer APX and the Bauer 1X. However, the fit in both of those didn’t quite match the X:60, even though they’re still from the Vapor line. Does anyone have any recommendations for a skate that provides a similar fit to the X:60 but with a carbon boot? I’m also looking for high-end stiffness. Any suggestions would be greatly appreciated! Thanks!

The Machs fit 1 didn’t work. I’m a fit 3 but they are too wide. Ever since the different fit systems, skates don’t fit me anymore. A vapor still likes a vapor and a supreme still fits like a supreme or least they used to. The shadow is a gongshow of a skate

I’m looking for a skate recommendation for a narrow foot with a deep in step. I currently can’t find anything on the market.

Are the svh any good. How many issues?

Yeah the belly pad. I removed the drawstring to put laces in

have a pair of nexus pro stock pants that have the drawstring. I want to change to the hockey lace but I can’t figure out how to match up the flap holes and the lace holes. Can anyone help?

@CCMHockey any feedback?

I have a ccm custom plus question. Please enlighten me if possible. Is having the classic tacks shape still an option. I remember a few years back where you could get th classic 552 tack lacing pattern and facing.

Is it possible to get KHL pro stock gear? is pro stock for the KHL the same as the NHL and other leagues?

Since IPv6Freely closed my topic for some reason which was rude. Is it possible to order sticks in a certain spec from Bauer or a smaller manufacturer? My specs are as follows: This is what I'm trying to get Stick Hand: RH Flex Profile: Bauer g15f (vapor X:60) Flex: 82 Shaft shape: -1 round shaft, like the sherwood ek15 series curve: Close toe, Like the old pro Kovalchuk/Zherdev Blade: sharkskin blade Stick height: Tall

Pure hockey still isn’t very good. They are just big. About bahr store, it always looked disgusting from the videos and pictures Stuff everywhere, very dirty and looked unorganized. I hope essan is ok, seems like he has a lot on his plate

Is that available at retail these days? Not the gloves. Looking for the protective

Did Bauer get rid of the nexus type of protective? The classic fit kind of stuff. I have nexus 1000 pants and nexus 8000 shins and looking for a replacement that is the same type of it. looking for the Bauer pro series type of fit

They look like Verbero skates

They actually made it? Looks like they bought a bunch of skates and made their own graphic. Are they any good?