easton

[splayerc12 0]

can you take the blade out of an easton one by heating it up like with some other ops ?

[devilsrule711 0]

it is possible there was a thread on this somewhere but you can definatley do it

[Project_2501 0]

Someone here was selling a blade removed from a Vapor XX inserted in a Vector 8.0 shaft.

[Nick23 0]

it can be done but you will need to chisel off a layer of paint i suspect, as for the vapor xx blade they must have to much spair time, woner hould it held up i would suspect the hosel would be weak.

[Project_2501 0]

A Vapor XX is just a fused tapered stick with paint over it.

[ChrisGass9909 0]

is that the same for the apollo

[Chadd 916]

is that the same for the apollo

yes

[ChrisGass9909 0]

if i pull the blade out of my apollo will i be able to put it back in?

[Project_2501 0]

Yes.

[ChrisGass9909 0]

could i over heat the shaft if i pull out the blade?

[Patrick67 1]

yes

[twiztidwrista10 3]

Not trying to steal the topic but can you pull the blade out of a 6k ops? It looks like i can see wear the blade and shaft meet. Theres kinda a real white paint over this area. looks like they tryed to do the same thing with the XX. anyone know?

[Project_2501 0]

Looking at my coach's stick, it looks like you can do it.

[dddatsyuk--48 0]

so for these sticks...where would i need to chisel off the layer of paint?

thanks in advance