Tuuk LS/LS2

[SyracuseBulldogs04 0]

What size LS/LS2 would I have to have if they would be mounted on a size 10 D width rbk 9k pump skate?

[whbd18 0]

288

[SyracuseBulldogs04 0]

Thanks whbd18, I previously did look it up on the sizing actually on hockeygiants sizing guide to there lightspeeds and did see a 10 d to be a 288, but i didnt know if a rbk skate might have a different dimmensions and not fit a 288....

[whbd18 0]

Thanks whbd18, I previously did look it up on the sizing actually on hockeygiants sizing guide to there lightspeeds and did see a 10 d to be a 288, but i didnt know if a rbk skate might have a different dimmensions and not fit a 288....

You might have to drill, as CCM/RBK has a unique hole pattern.

[SyracuseBulldogs04 0]

Can any skate expert confirm on this size? I just want to be 100% sure that I am buying the right size because I will be buying online because no LHS around here can get them in the amount of time I need them.

[JR Boucicaut 3810]

10D would be 287...which would be 288 in Bauer.

10.5 would take 296.

[SyracuseBulldogs04 0]

Thanks JR

[KevinVu19 0]

Hey boys,

I have a pair of 9ks that are size 6.5. The holders on it is 263, I just bought tuuk LS2 holders that are also 263, is it going to be the same fit?

And after reading of what some people wrote in this thread, Some one has to drill a hole into my skate for the steel?

I don't really post much, sorry for the trouble :P

EDIT: forgot a couple of words

[shotty 7]

the technician may have to drill holes to line up the holder on the boot properly. because the design of each brand's holder differs, the hole pattern will as well.

[KevinVu19 0]

You could still put the tuuks on the skates though right? Like that's what I am not sure about.

[elmoute 0]

the technician may have to drill holes to line up the holder on the boot properly. because the design of each brand's holder differs, the hole pattern will as well.

yeah, i got some 9k with c+ holders and got new wholes drilled

[ID Rollerpop 4]

You can put them on the skates. One other thing though in addition to drilling the mounting holes a larger hole may need to be drilled into the heel of the boot to access the runner attachment hardware inside the Tuuk holders.