Pro stock mission blades

[stock07 1]

Anybody have any pics of the Dimitrakos mid curve or the heel curve...It has both curves listed on HM...just wanted to see the diffrence between the two...Also any new patterns anyone has to post that hasent been posted?

check this thread theres atleast one Dimitrakos in here

Yea I checked the thread but all the pics posted of the dimitrakos have expired cause the arent showing up and I havent seen any talk through out the thread about the diffrence between the mid and the heel?

[vitaminZ 0]

Anybody have any pics of the Dimitrakos mid curve or the heel curve...It has both curves listed on HM...just wanted to see the diffrence between the two...Also any new patterns anyone has to post that hasent been posted?

check this thread theres atleast one Dimitrakos in here

Yea I checked the thread but all the pics posted of the dimitrakos have expired cause the arent showing up and I havent seen any talk through out the thread about the diffrence between the mid and the heel?

ahh sorry, I didnt realize they expired, I remember them being 5 lies if that helps

[stock07 1]

Anybody have any pics of the Dimitrakos mid curve or the heel curve...It has both curves listed on HM...just wanted to see the diffrence between the two...Also any new patterns anyone has to post that hasent been posted?

check this thread theres atleast one Dimitrakos in here

Yea I checked the thread but all the pics posted of the dimitrakos have expired cause the arent showing up and I havent seen any talk through out the thread about the diffrence between the mid and the heel?

ahh sorry, I didnt realize they expired, I remember them being 5 lies if that helps

Thanks....I just took a gamble and ordered a few blades:

2x Rahkshani

1x Dimitrakos(mid)

1x Brennan

Ill see how they work out...

[PWBIII 0]

heres the brennan. small heel curve with some loft. i love it.

[srv2miker 0]

just for info, the mid curve dimitrakos blades i have seen in the past were kariya pro copies. i've put them next to my properly labeled kariya pros and they were mirrored. so its a very small curve with little wedge to it; very flat 5 lie. don't know about the heel curve though.

i should have two green woods and two young composites coming this week. i'll throw up some pictures when i get the chance.

Did you ever get those Youngs? What were they like? What was the lie?

[srv2miker 0]

heres the brennan. small heel curve with some loft. i love it.

What's the lie on the Brennan?

[PWBIII 0]

heres the brennan. small heel curve with some loft. i love it.

What's the lie on the Brennan?

here is the profile (the bottom blade) it has a pretty low lie. Not sure exactly what though.

[nyrslr21 0]

Okay, so I searched through the entire thread and didn't find what I was looking for. I ordered a few Strakas (Koho, LH, 13, Square, Center, Slightly Open Toe) and got the dreaded call that they were out of stock so I switched it up to the Therrien which is supposed to be the same pattern. Anyone have a pic or an idea of what they might look like?

And do you think it would be similar to this? https://www.proreturnhockey.com/cart/item_d...imple.php?id=75

Thanks for the help

[Buzz_LightBeer 974]

the 13 was ted drurys pattern, similar to a darby or warrior weight

[hudsonhockey22 0]

whats the closest to a forsberg

[Taliondragon 0]

srv2miker,

Here's two pictures of the Young blade relative to a few Mission Hull (jr.) blades:

Profile View

Curve View

I couldn't get better pictures; my friend took the pictures since they're sitting at his place in the US. I don't know how to figure out the lie, but the Hulls that are beside it are 5.5 so maybe you can figure it out using the first picture.

just for info, the mid curve dimitrakos blades i have seen in the past were kariya pro copies. i've put them next to my properly labeled kariya pros and they were mirrored. so its a very small curve with little wedge to it; very flat 5 lie. don't know about the heel curve though.

i should have two green woods and two young composites coming this week. i'll throw up some pictures when i get the chance.

Did you ever get those Youngs? What were they like? What was the lie?

[Hooah4 12]

whats the closest to a forsberg

The Brewer (LH) is really close. A little more heel than mid though. Longer blade also.

[mykey514 0]

this is the mission Sakic pro stock blade.although in person it looks much more straight.i bought 2 of those but they are too straight for me.

[hudsonhockey22 0]

sorry i didnt specify (right handed)

[stuie7 6]

noticed a few of the pictures appear to show the blades in dolomite shafts, did you guys have to file down the end at all? my blade appears to be stuck half way in.

[Clark12 0]

My blade fitted into a pro-stock dolo shaft fine although there was a small bugle in the shaft where the hosel was inserted.

After using it about 10 times it seems to be holding up well, there are no cracks or damage to the shaft.

[PWBIII 0]

The Brennan needed some work to get it in. But my Guerin went in like butter.

I guess it just depends on the blade you get.

[Oberon 0]

noticed a few of the pictures appear to show the blades in dolomite shafts, did you guys have to file down the end at all? my blade appears to be stuck half way in.

Mine fit perfectly in a Dolomite shaft.

[Rustpot 1]

Had to file the tenon to get my standards into my AK shafts. They seemed to get pretty thick as they got toward the hosel.

Had one of my blades go into the Zamboni door yesterday. Twisted a bit and I had the sense to let it go. Ripped the tape on the toe up a bit (I had the whole blade taped up) and it seemed to not do any damage.

[hudsonhockey22 0]

anyone know about RIGHT handed forsberg clones. or anything in the ballpark of a forsberg

[Stampeder 2]

Finally got my shafts and missing blades. They sent me grips when I ordered non but I can live with that, got a McCaully and Brewer blade, both very Modanoish. Will take pics tomorrow.

[stock07 1]

Anyone know of any more RH blades that have the shinny finnish on them?

[Hooah4 12]

Finally got my shafts and missing blades. They sent me grips when I ordered non but I can live with that, got a McCaully and Brewer blade, both very Modanoish. Will take pics tomorrow.

Funny...I just received another Brewer. This one is a Drury clone. The other 2 I have are Modanoish

[Stampede#11 0]

I had the Dolo shaft with Mission pro stock Shanny curve and that was real challenge to get it in the shaft. Finally managed it but I am dreading the blade going and having to put my second blade in.... that's if the shaft doesn't got first of course!!

[Stampeder 2]

Finally got my shafts and missing blades. They sent me grips when I ordered non but I can live with that, got a McCaully and Brewer blade, both very Modanoish. Will take pics tomorrow.

Funny...I just received another Brewer. This one is a Drury clone. The other 2 I have are Modanoish

That is pretty odd, is yours a really fat blade? Mine is probably the thickest blade I've seen.