one90 & tapered blade?

[Dupes 1]

I did a search and came up with nothing :(

What kind of tapered blades fit on a cut one90 OPS?

Id like to know if someone actually did it, cause not all tapered blades are the same!

thanks for the help!

[Patrick67 1]

Get a longer hosel Taper blade like the Dolomite or CCM 10.0.

You'll lose lenght cutting the OPS to fit a taper blade, so they will make up for some of it.

While we're on the topic of the One90... how do you like the Tactile grip?

[Dupes 1]

thanks for the answer, Ill prolly buy a dolomite tapered blade!

My one90 is a pro stock, so it is a little different, its not tactile grip, its a grip coating like we see on Synergy's, and I love it!

[texanhockey 0]

i had a one 90 and really liked the grip. but it flakes off at the bottom and starts to work up. as for the blade. id like to know aswell because i have a broken one 90 just layin here and id like to put it to use

[furlanitalia 1]

i put a wood comp synth in mine, but had to cut fairly high up.

As for the grip, i have one of the originals with the bump grip, which was nice, and i have a prostock non bump grip version.

You notice the grip more on the prostock one.

[Dupes 1]

You notice the grip more on the prostock one.

definitely, but they now have the new one90 (red) which has the same grip as prostock :)

[blueliner27 12]

I'd suggest....

NBH Vapor XXX wooden blade.

[Dupes 1]

wood could be a option, but I prefer composite :)

[Fire0nIce228 1]

I'd suggest....

NBH Vapor XXX wooden blade.

How much do those sell for?

[TBLfan 25]

I'd suggest....

NBH Vapor XXX wooden blade.

How much do those sell for?

XXXlite wood blade

[cougarscaptain87 12]

if you perfer composite, then try the xxx-lite composite, or you could use a synergy II, personally i have put a tps r2 blade in a one90 shaft and it worked just fine.

[Dupes 1]

the XXX-lite blade is not yet available around here :( , that was my first idea!

[pisani34 10]

anyone have any idea how far up the shaft i would have to cut to fit a tapered mission prostock blade or a tapered dolomite blade in? My stick is already kind of short, and i don't really want to put a butt end into it, but can anyone put a picture up or explain where on the graphics or point on a retail one90 they cut at to fit a tapered blade? Im assuming its not a fused one piece so i cant heat/pull.....also, is there any filing of the inside of the shaft taht will have to be done?

[furlanitalia 1]

on a side note, has anyone flipped the shaft to fit a standard blade? i have whatever the new model of focus flex is, cnt or something. It should ideally fit, right?