Dan_The_Man_16 0 Report post Posted March 24, 2004 If I were to put these two together would the balance and feel be similar to that of a 1100 Fused? Because I know that the Synthesis' feel and balance seem different then a SyNergy, although they are supposed to be virtually the same thing. Share this post Link to post Share on other sites
EricG. 0 Report post Posted March 24, 2004 The stick will be blade heavy. That should be the only difference between that and the fused. Share this post Link to post Share on other sites
Dan_The_Man_16 0 Report post Posted March 24, 2004 Would it be blade heave because of the glue? Or because of a different blade? Share this post Link to post Share on other sites
PiKappaPhi 0 Report post Posted March 24, 2004 The people at Innovative said that there was no differences in the fused and nonfused sticks. So I am gonna guess there are no differences. Share this post Link to post Share on other sites
Dan_The_Man_16 0 Report post Posted March 24, 2004 Oh I see, well thats good because I have heard really good things about the OPS but have never used on. I have a 1100 shaft but I've only used it with R2 woodies and Synthesis blades.Thanks Guys Share this post Link to post Share on other sites
EricG. 0 Report post Posted March 24, 2004 The people at Innovative said that there was no differences in the fused and nonfused sticks. So I am gonna guess there are no differences. No difference in performance. The stick will be blade heavy. Share this post Link to post Share on other sites
PiKappaPhi 0 Report post Posted March 24, 2004 why do you say it will be blade heavy? Share this post Link to post Share on other sites
Gongshow11 1 Report post Posted March 24, 2004 why do you say it will be blade heavy? I'm assuming glue and that the balance will be more towards the blade. Share this post Link to post Share on other sites
Guest phillyfan Report post Posted March 25, 2004 IF there is a difference in balance and feel, it should be the very minimal, if any at all. Share this post Link to post Share on other sites
LegoDoom 0 Report post Posted March 25, 2004 I've used a tapered 1100 with Inno blade and it feels very much the same as the fused sticks.My Commander shaft and blade is pretty heavy though. Share this post Link to post Share on other sites
Dan_The_Man_16 0 Report post Posted March 25, 2004 Kovy likes heavy shafts and blades, as far as I know. Share this post Link to post Share on other sites
LegoDoom 0 Report post Posted March 25, 2004 The shaft is 350 with a butt-end (which you need since the shaft is on the short side). The combo is 550 grams with butt-end and tape. Share this post Link to post Share on other sites
Dan_The_Man_16 0 Report post Posted March 25, 2004 Yeah, that does seem kinda heavy for a graphite shaft blade combo. Share this post Link to post Share on other sites
MoCorleone 0 Report post Posted March 25, 2004 hey lego, which commander shaft are you talking about? the original one they had a few months ago or the 220/260 flex shafts they have now. because the 220/260 flex commander shafts are alot lighter. i used the new 260 flex shaft (uncut) with a inno Kariya graphite blade for warm ups monday and it was about the same weight as my si-core. Share this post Link to post Share on other sites
LegoDoom 0 Report post Posted March 25, 2004 I'm using the new 260 flex one. It still has the graphics that say 220 flex, but says 260 on the inside of the shaft. I believe my Si-Core is in the 510 gram range with a half wood-plug and tape. Share this post Link to post Share on other sites
ambro 0 Report post Posted March 25, 2004 why do you say it will be blade heavy? It might be a littler, but not noticeable. The reason is the tenon on blades is longer than the tenon on the blades they use in the fused sticks. Again, it is only like another 15 grams or so, so it's not noticeable. Share this post Link to post Share on other sites
