long wood end plugs

[raygunpk 0]

Are there any extra long wood end plugs out there? Longer than the standard 12"?

[habsfan87 0]

standard 12", thats huge...any bigger it won't last you too long. I've never seen anything bigger than that.

[raygunpk 0]

I bought a stick off ebay and didn't know it was cut so freakin short.. I added the 12" and it's still like 6" off my usual height. I was thinking of putting a composite end plug, then cutting off the top so theres a hole and then adding the wood. LOL.

[Rustpot 1]

I was thinking of putting a composite end plug, then cutting off the top so theres a hole and then adding the wood. LOL.

Doesn't work.

If the shaft is a foot and a half too short, I don't think you're going to want to use it. Unless you're 7'2" or something.

[automorph 0]

1.5 feet too short???? WOW , if you are 6"5 or taller you probably need to buy prostock (someone as tall) or custom

[raygunpk 0]

Yeah I suppose you're right..I shoulda asked the seller. =(

It's not that I'm tall, the stick was just cut REALLY short and I didn't know.

[li7039 0]

you got a picture of said stick?

[Cue 0]

haha, you're 5'10, how did you not tell from the picture when you bought it?

Must have been a huge tape job to cover that up.

[tommym96 0]

i would either use it with a 1 single composite/wood plug or cut your losses

[raygunpk 0]

So my One90 with uncut length no the right, and the Mission M-1 on the left. The tape on the M-1 goes down until the end of the wood plug...so you can imagine how short it initially was.

I should have gotten a clue when I asked what curve it was and the guy said it wasn't listed. He did say it was 85 flex though, so imagine how stiff it was when I received it. Like a bar of steel.

So if anybody wants a RH M-1 stick.....

[Rustpot 1]

And the guy didn't buy a junior, he just cut 18 inches off an 85 flex to use a 200-something....

I still chuckle to myself when my horrible form and strength can wire wristers to the top corners using my whip shafts, and the 5'-5'5 guys using 110 flex that have no shot look confused. Then they tell me in the locker room that they would never buy anything 85 or, God forbid, lower because it would snap right in half. Too bad my sticks are too long and no one uses the Drury, I offer to let them use my stick every time.

[raygunpk 0]

Whats your height/weight Rustpot?

[fastmiele 59]

I bought a stick off ebay and didn't know it was cut so freakin short.. I added the 12" and it's still like 6" off my usual height. I was thinking of putting a composite end plug, then cutting off the top so theres a hole and then adding the wood. LOL.

how long is the M-1 stick from the heel to the butt end ? I am guessing that its about 48 inches ?

I don't know how you got a 12 inch extender. I the longest I have seen is 6 or 8 inches.

[bheidepr 0]

Wood 8" and 12" extenders: http://www.inlinewarehouse.com/descpage-EJPLUG.html

Composites are usually around 4"

[raygunpk 0]

Yeah they only sold 12" here at my LHS.

[ktang 34]

Maybe you can Stick-Fix or SRS an extension to the M-1 to make it longer?

[raygunpk 0]

You can do that?

[diehardfan 0]

If you are handy, make your own.

Just grab a broken wooden stick and sand down one end and cut the other end to your desired length, should not take that long.

That is what I did, granted only needed ~2"

[kovalchuk71 212]

You can do that, but depending on how much you payed for the shaft, it may be cost prohibitive.

[stuie7 6]

that sticks insane haha!

i'd cut your losses (pardon the pun) and try to sell it to the nearest, ultra-strong, 'little person' :P