Broken Pro Stock 10k

[TJM254 0]

i found a tim jackman 10k at the isles practice rink that was broken so i picked it up...its broken right at the heel of the blade so the stick is intact except for the blade. if i cut up to a certain point on the shaft will i be able to insert a blade (i need to cut it down anyway its huge) or do i have to flip it over...or should i just keep it

[Rustpot 1]

i found a tim jackman 10k at the isles practice rink that was broken so i picked it up...its broken right at the heel of the blade so the stick is intact except for the blade. if i cut up to a certain point on the shaft will i be able to insert a blade (i need to cut it down anyway its huge) or do i have to flip it over...or should i just keep it

Send it to me, I'll let you know :P

Try to heat and pull first if you can tell where the fuse is, if not give it a cut and see if there's a tenon in there to push/chisel out. If it's looking like it's a true one piece you can keep cutting if the taper isn't too thin, or flip it at that point.

[interpathway 9]

Go with Rustpot's heat and pull to find the fuse, then use this thread to try and find what will work best for your stick.

http://www.modsquadhockey.com/forums/index...?showtopic=7494

[bar_down_21 0]

if you cut it right where the original blade starts you can fit a Sr. blade in it. I recently just put a Synthesis blade in a warrior mac daddy for my friend. Fit perfectly.

[Rustpot 1]

if you cut it right where the original blade starts you can fit a Sr. blade in it. I recently just put a Synthesis blade in a warrior mac daddy for my friend. Fit perfectly.

MacDaddy isn't a fused 2-piece.

[TJM254 0]

i found a tim jackman 10k at the isles practice rink that was broken so i picked it up...its broken right at the heel of the blade so the stick is intact except for the blade. if i cut up to a certain point on the shaft will i be able to insert a blade (i need to cut it down anyway its huge) or do i have to flip it over...or should i just keep it

Send it to me, I'll let you know :P

Try to heat and pull first if you can tell where the fuse is, if not give it a cut and see if there's a tenon in there to push/chisel out. If it's looking like it's a true one piece you can keep cutting if the taper isn't too thin, or flip it at that point.

would i want to heat it with a heat gun basically doing the same thing as if i had a normal 2 piece stick? im going to try this method first and if it doesnt work ill just have to cut it to the length i want and see if a blade will fit?

or should i just keep it as a souvenir??...maybe not

[DEATHTRON 19]

I know it isnt out yet....and also the possibility the 10k isnt really a 10k, but which way is it manufactured? Like a wood stick, or a traditional shaft and blade combo....that would make a huge difference if youre attempting to pull the blade.

Zach

[sm326 0]

i might try and stop by a few practices during my winter break from college just for that reason. maybe i'll get lucky and get a twig from bailey that isnt broken.

[TJM254 0]

I know it isnt out yet....and also the possibility the 10k isnt really a 10k, but which way is it manufactured? Like a wood stick, or a traditional shaft and blade combo....that would make a huge difference if youre attempting to pull the blade.

Zach

im pretty sure its a 10k it has most of the features you would expect (visible carbon, etc...) around the blade also has a spray paint like finish (almost like the one95 but much much more rough)

[DEATHTRON 19]

I was talking about if the blade was insterted like a woodstick (which both CCM and RBK sticks have had done, making it worthless to attempt a blade pull on) or, if it was made like the lower end 5k's and the 9ko where it actually had a blade inserted into a shaft...which you COULD pull the blade out of (theorhetically). Thats why I was asking how the 10k was made...it might be futile for him to even try to pull it.

Zach

[TJM254 0]

I was talking about if the blade was insterted like a woodstick (which both CCM and RBK sticks have had done, making it worthless to attempt a blade pull on) or, if it was made like the lower end 5k's and the 9ko where it actually had a blade inserted into a shaft...which you COULD pull the blade out of (theorhetically). Thats why I was asking how the 10k was made...it might be futile for him to even try to pull it.

Zach

im not sure if it is a true one piece or a fused shaft and blade...i guess i will try heating it and see if anything happens

[li7039 0]

i might try and stop by a few practices during my winter break from college just for that reason. maybe i'll get lucky and get a twig from bailey that isnt broken.

a kid from my school picked one of his SEs up from the game used shop at the colesiuem. Im not a expert on that place by no means, he said it was 200.

[dalebert 8]

i might try and stop by a few practices during my winter break from college just for that reason. maybe i'll get lucky and get a twig from bailey that isnt broken.

a kid from my school picked one of his SEs up from the game used shop at the colesiuem. Im not a expert on that place by no means, he said it was 200.

Yeah according to the sign went I saw it "Tier 1" players sticks are 200 bucks and "Tier 2" players sticks are 100. I don't know who the players are on each Tier but I just remember seeing the sign.

[TJM254 0]

tier 1 was only a few guys like guerin dp i dont remember who else but i think it was like less than 5 guys...the game used shop is actually a decent deal since u are getting the sticks for 100 and most arent really used...ive thought about getting one from their once but i figured it would be hard to get the right curve