Tuuk Custom + holder LS Edge replacement

[VegasHockey 1280]

Is the mounting the same on a Tuuk Custom+ when compared to a LS Edges holder?

[Monty22 832]

No, different hole patterns.

[JR Boucicaut 3797]

Similar is probably the better word.

It's generally the same pattern.  On some sizes it gets tricky and you may have to expand a hole or so.

[caseyjones 26]

Do Lightspeed 2 and tuuk edge rivet patterns line up?  My tuuk edge is driving me crazy with clicking and moving steel 

[Sniper9 529]

On 10/18/2024 at 8:46 AM, caseyjones said:

Do Lightspeed 2 and tuuk edge rivet patterns line up?  My tuuk edge is driving me crazy with clicking and moving steel 

Same.  It'll be an easy swap.  I love the ls2 holders too. And the good thing is you can still get quality dlc steel for them. companies like jrz still make em

Edited October 21 by Sniper9

[caseyjones 26]

Thanks. Yeah there is cheap step steel available too.  I still haven’t made up my mind on what I’m going to do though.  I bought tuuk edge holders for cheap that are a size larger than my current ones.  I’m getting impatient with the transitioning to smaller holders as well.  I have 3 sets of edge steel for the current holders on my skates though.  I might give profiling one last go before I make a decision.  Obviously if I went with a larger ls2 holder the rivets won’t line up

[Sniper9 529]

On 10/20/2024 at 7:40 PM, caseyjones said:

Thanks. Yeah there is cheap step steel available too.  I still haven’t made up my mind on what I’m going to do though.  I bought tuuk edge holders for cheap that are a size larger than my current ones.  I’m getting impatient with the transitioning to smaller holders as well.  I have 3 sets of edge steel for the current holders on my skates though.  I might give profiling one last go before I make a decision.  Obviously if I went with a larger ls2 holder the rivets won’t line up

Also keep in mind that with ls2 holders you generally want to drill a hole in the rear of the boot to access the bolt to swap the steel unless you want to remove the holders every time you switch steel.