colezy9 1 Report post Posted July 10, 2023 Has anyone done a weight comparison between the ft6 and ft6 pro shin pads? Quote Share this post Link to post Share on other sites
VegasHockey 1267 Report post Posted July 10, 2023 Ice Warehouse shows the following: 600 grams: https://www.icewarehouse.com/CCM_Jetspeed_FT6_Pro/descpage-CSGFT6P.html 619 grams: https://www.icewarehouse.com/CCM_Jetspeed_FT6/descpage-CSGFT6.html Quote Share this post Link to post Share on other sites
Westside 220 Report post Posted July 12, 2023 On 6/27/2023 at 2:25 PM, Westside said: Noticed that some FT6 Pro skates appear to have visible carbon fiber and others do not. Is there a reason behind this? Was visible carbon for prototype or custom versions? Example of exposed carbon. Non visible carbon was shown on the previous page https://www.instagram.com/p/CmE54-hJzlF/?igshid=Y2IzZGU1MTFhOQ== May have found an answer to my own question. Could US skates with the lower flex rating (195) be black and Euro skates with a higher flex rating (215) be exposed carbon? Lines up with these UK skates on eBay and those featured on hockey tutorial’s YT channel and other European outlets https://www.ebay.com/itm/185981879942?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ZUWO54H8Sg-&sssrc=4429486&ssuid=SnF9bMyvRdu&var=&widget_ver=artemis&media=COPY Quote Share this post Link to post Share on other sites
noupf 42 Report post Posted July 12, 2023 13 hours ago, Westside said: May have found an answer to my own question. Could US skates with the lower flex rating (195) be black and Euro skates with a higher flex rating (215) be exposed carbon? Lines up with these UK skates on eBay and those featured on hockey tutorial’s YT channel and other European outlets https://www.ebay.com/itm/185981879942?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ZUWO54H8Sg-&sssrc=4429486&ssuid=SnF9bMyvRdu&var=&widget_ver=artemis&media=COPY Damn...somebody just got a pair of $1100 skates for like $350.......brand new. Quote Share this post Link to post Share on other sites
noupf 42 Report post Posted July 12, 2023 (edited) On 6/27/2023 at 10:21 PM, VegasHockey said: I also have seen the FT6 Pro skate in person, no exposed carbon is visible. I think only the custom option will have exposed carbon. Such a shame, since they look so good! @VegasHockey Question for you.......I recall a post you made year or so ago, where you talked about the new ASV Skate line and the new skate last / moulds compared to the the Ribcors. More specifically, I think you said you were a regular width 9.5 in the 100k Pro's, but were a 9.0 tapered in the ASV's. Where do you stand with the FT6 Pro's? Are they more voluminous like the ASV's or are they less, more so like the 100K pro's? For reference, I am in 100k Pro's now and felt the exact same thing you did. I too had to go a half size smaller and down to the tapered when trying out the ASV's. I opted for the 100k's bc they were not as stiff, and went a half size up and chose the regular width for the perfect fit compared to the ASV's Edited July 12, 2023 by noupf Quote Share this post Link to post Share on other sites
VegasHockey 1267 Report post Posted July 13, 2023 On 7/12/2023 at 8:39 AM, noupf said: @VegasHockey Question for you.......I recall a post you made year or so ago, where you talked about the new ASV Skate line and the new skate last / moulds compared to the the Ribcors. More specifically, I think you said you were a regular width 9.5 in the 100k Pro's, but were a 9.0 tapered in the ASV's. Where do you stand with the FT6 Pro's? Are they more voluminous like the ASV's or are they less, more so like the 100K pro's? For reference, I am in 100k Pro's now and felt the exact same thing you did. I too had to go a half size smaller and down to the tapered when trying out the ASV's. I opted for the 100k's bc they were not as stiff, and went a half size up and chose the regular width for the perfect fit compared to the ASV's Normally a 7.5 regular, in the FT6 Pro I wear a 7.0 Tapered. The changes to the new skate last has made them fit overall bigger. 1 Quote Share this post Link to post Share on other sites
BesToss 0 Report post Posted July 25, 2023 Does anyone know why none of the big retail stores have FT6 Pro skates tapered fit in stock? I usually wore Bauer Fit 2 or CCM Regular in the past and would love to try the tapered fit in store. So far I'm only seeing IW and CCM website have them in stock Quote Share this post Link to post Share on other sites
VegasHockey 1267 Report post Posted July 27, 2023 On 7/24/2023 at 9:17 PM, BesToss said: Does anyone know why none of the big retail stores have FT6 Pro skates tapered fit in stock? I usually wore Bauer Fit 2 or CCM Regular in the past and would love to try the tapered fit in store. So far I'm only seeing IW and CCM website have them in stock Because most of the stores did a terrible job with booking orders.... Quote Share this post Link to post Share on other sites
clarkiestooth 235 Report post Posted July 27, 2023 My new Jets. 1 Quote Share this post Link to post Share on other sites
noupf 42 Report post Posted July 27, 2023 2 hours ago, clarkiestooth said: My new Jets. uhmmmmmmmmmmmm, how did you get yours with the carbon fiber showing? To the understanding of many here, the north american models don't show the carbon fiber on the retail skates. Quote Share this post Link to post Share on other sites
clarkiestooth 235 Report post Posted July 27, 2023 (edited) 26 minutes ago, noupf said: uhmmmmmmmmmmmm, how did you get yours with the carbon fiber showing? To the understanding of many here, the north american models don't show the carbon fiber on the retail skates. Just lucky, I guess. Kidding aside, I just got back from Sweden, where I work with the top skating/skills group there and I also work with Marsblade. They had a nice present waiting for me when I arrived in Stockholm. I asked and they told me this carbon version is only available in Europe. Also, if you haven't tried the Marsblade I2, you're missing out. So good. Edited July 27, 2023 by clarkiestooth 1 Quote Share this post Link to post Share on other sites
VegasHockey 1267 Report post Posted July 28, 2023 On 7/27/2023 at 3:28 PM, clarkiestooth said: Just lucky, I guess. Kidding aside, I just got back from Sweden, where I work with the top skating/skills group there and I also work with Marsblade. They had a nice present waiting for me when I arrived in Stockholm. I asked and they told me this carbon version is only available in Europe. Also, if you haven't tried the Marsblade I2, you're missing out. So good. I think the European model is stiffer and the build is closed to an AS-V Pro, thus the exposed carbon. Quote Share this post Link to post Share on other sites
start_today 757 Report post Posted November 19, 2023 Has anyone used the Jetspeed 485 or 680 shoulder pads? Any strong opinions? Quote Share this post Link to post Share on other sites