Synthesis Blade Questiom

[Eagles39 0]

I really needed a new blade, but I was busy so my dad went to the store and bought one. Unfortunately it is a synthesis, but I dont have a synthesis shaft. Will the this blade work in a regular shaft? Thanks for the help.

[ShaneyB 0]

no , i think they only fit in the same shaft but im not sure

[sherwood21 0]

What shaft do you have? Is it tapered, or standard. If it is a senior blade and you have a senior tapered shaft then it will fit. The same applies with Intermediate blades/Inter shafts, as well as junior blades/junior shafts.

[calvin 0]

i have seen it fit a m-2 shaft.

[Eagles39 0]

I have a standard redlite X10.

[blues_91 0]

Ask the store if you could exchange it for a Z-carbon or something in the same price range.

[Chadd 916]

I really needed a new blade, but I was busy so my dad went to the store and bought one. Unfortunately it is a synthesis, but I dont have a synthesis shaft. Will the this blade work in a regular shaft? Thanks for the help.

It won't work. I've seen people try to make it work by wrapping several layers of tape but it never works well.

[Adam91 0]

i ve seen people put them in responses sp you might be able to it depends if your shaft is tapered or not

[Chadd 916]

i ve seen people put them in responses sp you might be able to it depends if your shaft is tapered or not

He did say it was a "regular shaft".

[Tanner23 0]

i heard a while back that the synthesis blade would only fit in tje synthesis shaft but I dunno

[Eazy_b97 1]

Not true. Synthesis blades will fit another companies tapered shaft as well, with the exception of their intermediate blades.

[Ranger-#8 1]

Nope redlite is a standard shaft. There is no way to fit a synthesis blade in it, and still hope for it to stay in never the less perform.

[mickz 107]

Better to trade the Synthesis for somethign standard with someone on this board.

[Michael9 57]

i got my synthesis blade to fit in my z-bubble grip without any tape ... only a bit of extra glue, that did the trick

[SnakeEyes29 0]

my friend did some thing to his syn. blade and he made it fit in a redlite

xn10 fit nice, no shaking or anything

[Michael9 57]

mine didn't skake either i stayed right in it's place

[A_Steeves12 0]

did you cut it off where it flares out? i just cant see that working with just extra glue

[2-Keys 1]

you might be able to get it to work but the preformance will probably be bad. my friend put a synthesis blade in a zbubble with tape rapped around the end but it didnt have vary good feel at all. id try to exchange it.

[lecavalier 0]

I also highly doubt that you can out it into a standard shaft without any problems such as shaking etc..you would have to hold it in the perfect position until the glue solidifies up and everything.

btw 2-keys the gloves in your avatar are plain sick

[A_Steeves12 0]

2-keys are those your gloves.

i am in love with them!!