Senior Low Flex Shafts

[Turgeon77 0]

Does anybody know of a shaft that has senior length and junior-intermediate flex??? I just wanted to try out like a 50 flex stick to see what happens.... I want one that is long enogh for me without putting a butt end in...

[tyler33 0]

Does anybody know of a shaft that has senior length and junior-intermediate flex??? I just wanted to try out like a 50 flex stick to see what happens.... I want one that is long enogh for me without putting a butt end in...

Your best bet is to try getting a pro stock stick. I know you can't get something like that in retail, the closest thing would probably be a whip flex tps.

[Kyle_M 0]

Maybe an Inno 2000 shaft. On the Inno website it says they come in 340 flex. Not sure how accurate the flex ratings are but it's just a suggestion.

[thejackal 46]

Innovative 440 (easton 65 flex) is about as flexyas it gets.

[nieminen18 0]

Innovative 380 is pretty flexible and is standard length.

[Icedog03 0]

You might be able to get on of Hulls 60 something flex shafts off ebay.

[Kyle_M 0]

Hull uses a 62 flex on the Easton Scale. If you can get one of those off eBay like Icedog said, that would probably as flexible as you could get.

[mack 44]

Just be sure not to get the UL ones with MM Bubble graphics if you want a 60 flex.

[aarias19 0]

Just be sure not to get the UL ones with MM Bubble graphics if you want a 60 flex.

were they stiffer than anticipated?

aarias19

[mack 44]

They were 80ish as advertised.

[sn1per 0]

cyclone 70 flex. I dunno if you'd want the smaller grip on the stick though

[Guest phillyfan]

Typhoon is 80 flex I believe, but I wouldn't waste too much money on a higher-end shaft. I can't see anyone senior size using those sort of flexes, it still amazes me how Hull has mastered that.

[Chadd 916]

Ballistik makes a 70 flex in senior. I have one sitting in the corner.

[thejackal 46]

Ballistik makes a 70 flex in senior. I have one sitting in the corner.

Their shafts warp. Mine already has a small but noticable bow on it. However i did find it decent for what i paid.

[dietzie27 0]

Ballistik makes a 70 flex in senior. I have one sitting in the corner.

Their shafts warp. Mine already has a small but noticable bow on it. However i did find it decent for what i paid.

do you think it would hold up good for roller hockey?

[thejackal 46]

Ballistik makes a 70 flex in senior. I have one sitting in the corner.

Their shafts warp. Mine already has a small but noticable bow on it. However i did find it decent for what i paid.

do you think it would hold up good for roller hockey?

yeah, if you can get over its weight then go for it. Beside, even if you do break it its still damn cheap.

[Chadd 916]

Ballistik makes a 70 flex in senior. I have one sitting in the corner.

Their shafts warp. Mine already has a small but noticable bow on it. However i did find it decent for what i paid.

I haven't noticed that, maybe because I never used them for very long. Then again, I used to pay about $10 a shaft.

[BoMbA17 0]

If the shaft begins to warp, can you rotate it so it bows the other way and maybe make it straight again?

[Dan_The_Man_16 0]

I think by the time you got it remotley straight, it would have worn alot and would probably break. Sounds like it's worth a try though. Just look areound on E-Bay or here in the Sell forum for a Hull Pro Stock.

[Buzz_LightBeer 969]

harrow used to make senior shafts in 40 flex and 55 flex (or around) im not sure how that went over but its worth a try

[dietzie27 0]

that thing has to be a piece of cardboard