HBPuckstopper 0 Report post Posted October 7, 2012 A G3 and a G35 is the same fit with the G3 being low volume and a 35 being mid volume. I have really narrow, flat feet with medium depth so i tend to crease and mangle any boot with too much volume or width. Thats what ended up happening to my 11ks. G35s and vapors are a pretty similar fit and depth, but with my flat feet, it seemed much worse in the vapors. Quote Share this post Link to post Share on other sites
Larry54 243 Report post Posted October 8, 2012 I just posted this picture in the Sprung thread. Since the picture is already uploaded, I figured I'd post it here, too. Quote Share this post Link to post Share on other sites
wetwilly17 6 Report post Posted October 8, 2012 A G3 and a G35 is the same fit with the G3 being low volume and a 35 being mid volume. I have really narrow, flat feet with medium depth so i tend to crease and mangle any boot with too much volume or width. Thats what ended up happening to my 11ks. G35s and vapors are a pretty similar fit and depth, but with my flat feet, it seemed much worse in the vapors.i also found that the g35 have more forefoot width compared to g3 Quote Share this post Link to post Share on other sites
romdj 26 Report post Posted October 9, 2012 i also found that the g35 have more forefoot width compared to g3Definitely, g3 felt narrow all the way while g35 has more of a V shape/fit. Quote Share this post Link to post Share on other sites
jeff080 0 Report post Posted October 9, 2012 Can anyone hook me up with a mount job? Or point me to a place that will do one I i mail my skates to them? I have a pair of Easton Z-Air boots I want to mount a mission vanguard on. Thanks! Quote Share this post Link to post Share on other sites
sharks25 9 Report post Posted October 9, 2012 The shop near me does good work, I can get you a price, ill be there tomorrow evening. PM me and ill get you their info. You can ship to me and I can take them there for you if they don't wanna deal with the hassle of shipping. Quote Share this post Link to post Share on other sites
jeff080 0 Report post Posted October 9, 2012 Sweet, PM on the way. Where are you located? I'm in NW Florida. Quote Share this post Link to post Share on other sites
sharks25 9 Report post Posted October 9, 2012 I'm in San Jose, CA. Haha like the furthest possible place from Florida. The shop here is in Rollin Ice, the top roller facility in the US. If the guy that did my skates is still in charge of the conversions you'll be very pleased with the work. Its a great shop, with a speedy turnaround time. Quote Share this post Link to post Share on other sites
jeff080 0 Report post Posted October 10, 2012 Definitely the furthest haha! It's all good though. I'll take your word that they're legit. If it works out, i'll give you a finders fee too. Thanks bro! Quote Share this post Link to post Share on other sites
SirJW 207 Report post Posted October 10, 2012 Definitely the furthest haha! It's all good though. I'll take your word that they're legit. If it works out, i'll give you a finders fee too. Thanks bro!Please post pix when you get them. Quote Share this post Link to post Share on other sites
Trumanperro 1 Report post Posted October 12, 2012 (edited) Hey guys,Long time reader and first time poster. Just wanted to share some of my conversions with you.Bauer Supreme One95 // Mission Vanguard Chassis // RR Splits // Bevo ABEC 9'sBauer Supreme One 70 // Mission Vanguard Chasis // Labeda Millenniums // Bevo ABEC 9 BearingsThe one95's are pro stock and came extra stiff with a double thick tongue. I switched it out for an after market and cleaned them up a bit. I've mounted Easton s12's and grafs in the past but always end up going back to the supreme line. Edited October 12, 2012 by Trumanperro 1 Quote Share this post Link to post Share on other sites
delerium 0 Report post Posted October 13, 2012 my indoors for now - working on my s15's next weekendccm vector v10smission vanguard chassis now with revision variant wheels my outdoorreebok 5k pumpschassis off my old bauers with pro 250 wheels Quote Share this post Link to post Share on other sites
HBPuckstopper 0 Report post Posted October 14, 2012 (edited) Thought it would be worth it to show off these... my friends skates he just finished today. One.9 LE, Mission Mag, Addictions Edited October 17, 2012 by HBPuckstopper Quote Share this post Link to post Share on other sites
t0nnn 0 Report post Posted October 20, 2012 (edited) These are my 13 ish year old Bauer supreme 4000's, Used them on ice for years then converted to roller. They've been like this for 7-8 years....served me well over the years I really don't like the chassis, I've always had the shock locked, but the rubber spacers are starting to ware and my rear wheel does have some side play, which is starting to affect skatingI'm finally retiring them next week from indoors....ordered Bauer xr4'sFunny thing is, I bought the xr4's last week and didn't realize that some of the threading on the boot where it meets the toe cap was coming out and loose, I returned them and waiting for a new pair ...pretty weak, these killers don't have one thread frayed and have been beaten to death. By the way, the pink laces are from when our team was 'the pink panthers' a few years back Edited October 20, 2012 by t0nnn Quote Share this post Link to post Share on other sites
henryb 4 Report post Posted October 27, 2012 Hey matt12, I think it would be in your best interest to stick with Bauer, they are really the only "Hockey Only" company out there that invests millions of dollars into strickly hockey equipment R&D. There is no surprise why they are at the head of the pack as far as skates goes! Especially, if you are happy with their fit, go with what works!Regarding doing a conversion... lots of good options, however, the top Roller skate models, have some nice features that can only be found on skates made specifically for Roller. Here are a few examples... most Roller skates have extra bumpers on the sides of the skate just behind the toe-box, this is an especially high wear area for Roller... ice skates don't have those. Ventilation, just look at what lengths Mission has gone to ventilate their Roller skates, you won't find anything like that on ice-skates. Quote Share this post Link to post Share on other sites
HBPuckstopper 0 Report post Posted October 27, 2012 In addition the outsole on the Bauers is by far the strongest. Currently i have G35s mounted, but people have had issues in the past with Grafs falling apart. Since nearly all Bauer skates are ultra stiff, they hold up longer than most skates would. Quote Share this post Link to post Share on other sites
chrisfab 0 Report post Posted November 3, 2012 BEWARE! I recently converted supreme80s to inline....the outsole is extremely thin in the center, and i can feel the chasis flex into the bottom of my foot while skating. I will be converting them back to ice shortly....the outsole is thick on the perimeter where the skate chasis connects.Bummer! Quote Share this post Link to post Share on other sites
henryb 4 Report post Posted November 5, 2012 If you are interested in using a set of Sprung's for the conversion, they have a wide foot-print, much like the ones on ice skates and would sit up against the outer edge of the outsoul on your Supreme80's, where they are thicker and stronger. Quote Share this post Link to post Share on other sites
chrisfab 0 Report post Posted November 5, 2012 thank you for the reply...my gosh i have posted my results on so many boards with zero feedback.I like the fit of the boot of my supreme80's, and would absolutely consider a new chasis if they are mounted to the outside...got any pics? I would be worried about the extra drill holes too, but if they are indeed on the outside it may work....any extra info would be greatly appreciated...I have spent so much money on past skates and this current conversion...in fact i am using an old pair of mission proto vi's with tape around the ankle of my left boot where the boot is torn.Desperate here, I am.please respond! Quote Share this post Link to post Share on other sites
henryb 4 Report post Posted November 5, 2012 (edited) Check the Sprung Hockey website for photos and such. Also look on YouTube, there is a fairly detailed video of someone doing an inline conversion to Sprung's about 10 mins long. Edited November 6, 2012 by henryb Quote Share this post Link to post Share on other sites
sharks25 9 Report post Posted November 6, 2012 Here are Jeff080's Z-Airs! They did a good job, as usual. Quote Share this post Link to post Share on other sites
jeff080 0 Report post Posted November 17, 2012 Can't wait to rock these! Quote Share this post Link to post Share on other sites
haNes 0 Report post Posted December 4, 2012 New skates, only some detail work at the screws needs to be done. Switched from my TotalOne with hummer to these rockers! Love the new NXG 9.0, worse every cent! Quote Share this post Link to post Share on other sites
crispy92 14 Report post Posted December 7, 2012 Thinking about getting a pair of EQ50's to convert to roller. Anyone know how they fit.Also im anybody know a place in Long Island that does good conversion Quote Share this post Link to post Share on other sites
the_game 452 Report post Posted December 7, 2012 Thinking about getting a pair of EQ50's to convert to roller. Anyone know how they fit.Also im anybody know a place in Long Island that does good conversionPM'd you about a conversion on LI. Quote Share this post Link to post Share on other sites
