changing Tuuk Lightspeed Edge holder to Lightspeed 2 holder

[BRUINS_FAN_74 19]

I have a pair of NEXUS 8000 skates and Stepsteel won't be making steel for the lightspeed edge holder... So, I'm going to replace the edge holder with Lightspeed 2 holders so I can put Stepsteel V runners on them. So my question is, will the holes from the lightspeed 2 match up with the holes from the Lightspeed edge?

[stevelknievel 51]

I believe they will

[mojo122 538]

Just go with Edge LS3 instead of messing around with the holders.

[BRUINS_FAN_74 19]

Already have the lightspeed 2 holders and Steepsteel V LS2 on the way

[laserrobottime 149]

The holes line up

[oldtrainerguy28 478]

There maybe one or 2 holes that are not perfect but I just use 4 coppers on the heel middle holes steel and the 2nd from the bottom of the front copper as well and have had no issues.

Had many less issues with sr edge holders this season still having issues with Jr and the blades being loose. Today had a Sr trigger break internally. Be nice if they sold the parts so the kid didn't have to get a whole new holder.

[t6lock 24]

Will putting 263 LS2 holders on a size 6.5D (254) skate require hole adjustments?

[laserrobottime 149]

Will putting 263 LS2 holders on a size 6.5D (254) skate require hole adjustments?

Yes

[oldtrainerguy28 478]

Will putting 263 LS2 holders on a size 6.5D (254) skate require hole adjustments?

IF YOU (oops) use a 2 part epoxy on the outside after covering the inside with duct tape. You can fill the holes and re drill. ten you can center where you need it without having hole issues!