flip12 729 Report post Posted July 16 5 minutes ago, A2rhino said: Hey there guys, Needing some help here. I'm shopping a pair of these skates online and needing some help with fit. I currently am in a pair of Bauer Mach skates, size 9 fit 2. I recently bought a pair of the Cat Pro's in a size 9 D and they were crushing my toes.in the toe box to the point that I couldn't get my foot completely in them. I reordered a pair of the 10 D and my foot fit in them with my toes against the toe box but after kicking the heel back they were better. With that said, My toes are still smashed in the toe box. I am thinking of sending them back for a size 10 E. in hopes that they will fit better but was just told from TRUE that Once the skates are baked you will gain about 1/4 to 1/2 size in length and width if that helps you. Now I'm really confused with what to do.. Any experienced help is VERY MUCH appreciated. Were the 9D and 10D Trues baked? Personally, I felt like the 9-F1 Hyp2rlite felt like I'm used to from 9.5D Vapors: snug all around the foot, just feeling the toe cap but not jammed. Catalyst 7 I have 9.5D and I'm confident I couldn't do a 9D. I think ideally I would have 9.5C, because the Trues just feel too big in all areas but the length. Tying them tighter doesn't help because then I have no forward flex...so 9.5C and a different pattern cut probably. Before they were baked I was worried I had ordered the Catalysts too small. I couldn't get my foot in. Post bake they were comfy but not really the fit or flex profile for me. I'm guessing 10D will be way too big once they're baked on you. 9.5D is a decent bet if you're happy with 9-F2. Quote Share this post Link to post Share on other sites
A2rhino 77 Report post Posted July 17 I did not bake them in fear of not being able to return them if they didn't fit. Thank you for the advice. I will give this a try and report back with my experience. Thanks again. 1 Quote Share this post Link to post Share on other sites
Sniper9 546 Report post Posted July 17 (edited) 5 hours ago, A2rhino said: I did not bake them in fear of not being able to return them if they didn't fit. Thank you for the advice. I will give this a try and report back with my experience. Thanks again. If you were a 9 in Bauer you should be a 9 in true. I'd try a 9 wide before going to a 10 wide. Why did you jump from a 9 to a 10? Also you said catalyst pro, so does that mean they are pro stocks? If so, then they were made for another players feet so certain areas could be adjusted accordingly. True skates have quite a lot of padding in the heel pocket unlike other brands. So that area does break in and get thinner after baking and after some ice time, and will create a couple mm if additional length once settled. Edited July 17 by Sniper9 2 Quote Share this post Link to post Share on other sites
flip12 729 Report post Posted Friday at 08:12 PM (edited) On 7/17/2025 at 9:35 PM, Sniper9 said: If you were a 9 in Bauer you should be a 9 in true. I'd try a 9 wide before going to a 10 wide. Why did you jump from a 9 to a 10? Also you said catalyst pro, so does that mean they are pro stocks? If so, then they were made for another players feet so certain areas could be adjusted accordingly. True skates have quite a lot of padding in the heel pocket unlike other brands. So that area does break in and get thinner after baking and after some ice time, and will create a couple mm if additional length once settled. Same size from Bauer to True, even with the difference in toe cap shape? Bauer's most recent toe caps have all been more anatomical than True's. True's are more symmetrical. That's what kills it for me. If True's toe caps had the same floor plan as Bauer's, I could do a 9 in True no problem. That would probably be better even, considering the roomy, disconnected feel I got from my Catalysts no matter what I threw at the problem. With each step towards a more anatomically shaped toe cap, I've dropped a half size in Bauer: 10D in Vapors in the 90's toe cap (Vapors 8 - XXX), 9.5D in the XXXX generation toe caps that were more anatomical, and 9-F1 in the 2X Pro that were even more anatomical. Hockey Tutorial says they've made further adjustments to the toe cap on the FlyLite, but I haven't handled them in person yet to see if it makes any difference for me. In my 9.5R Catalyst 7s my toes were as pressed against the toe cap as they could be without restricting motion or causing discomfort. Edited Friday at 08:21 PM by flip12 1 Quote Share this post Link to post Share on other sites
Sniper9 546 Report post Posted Tuesday at 01:11 AM On 7/18/2025 at 1:12 PM, flip12 said: Same size from Bauer to True, even with the difference in toe cap shape? Bauer's most recent toe caps have all been more anatomical than True's. True's are more symmetrical. That's what kills it for me. If True's toe caps had the same floor plan as Bauer's, I could do a 9 in True no problem. That would probably be better even, considering the roomy, disconnected feel I got from my Catalysts no matter what I threw at the problem. With each step towards a more anatomically shaped toe cap, I've dropped a half size in Bauer: 10D in Vapors in the 90's toe cap (Vapors 8 - XXX), 9.5D in the XXXX generation toe caps that were more anatomical, and 9-F1 in the 2X Pro that were even more anatomical. Hockey Tutorial says they've made further adjustments to the toe cap on the FlyLite, but I haven't handled them in person yet to see if it makes any difference for me. In my 9.5R Catalyst 7s my toes were as pressed against the toe cap as they could be without restricting motion or causing discomfort. How are you dropping sizes when the Bauer toecaps have been getting more anatomical and less volume? Or is it bc the longest part is now in the big toe area and tapers shorter whereas before the longest area was like where ur third toe would be? If that's the case then I can see your point. For me I wore 7 catalysts, Bauer, and CCM. But that's just me. You do bring up a good point regarding the toe caps if someone has their longest toe being their big toe or second. Quote Share this post Link to post Share on other sites
flip12 729 Report post Posted Tuesday at 12:41 PM 11 hours ago, Sniper9 said: How are you dropping sizes when the Bauer toecaps have been getting more anatomical and less volume? Or is it bc the longest part is now in the big toe area and tapers shorter whereas before the longest area was like where ur third toe would be? If that's the case then I can see your point. For me I wore 7 catalysts, Bauer, and CCM. But that's just me. You do bring up a good point regarding the toe caps if someone has their longest toe being their big toe or second. Yes, exactly because of the changes in toe length. The height of the toe box has never been a problem. 1 Quote Share this post Link to post Share on other sites